gotta get 19"s with no rubbing

romak47 · 08-14-2010, 12:41 PM

I have KW v2's and a 30mm drop , what 19" rims and tires can i get with no rubbing?
Im assuming that at least a 50et offset in back is best since i hear thats where rubbing issues prevail? haha.

romak47 · 08-14-2010, 12:56 PM

oh yea, with a 30mm drop.

What amount of camber should i get front and back??

N47_Drei · 08-14-2010, 10:40 PM

just "roll the fenders" and no worries

Eyeman · 08-15-2010, 11:30 AM

Forgestars are about all I can think of other than a custom wheel. I'd definitely look for an offset of 50 or so if the wheel is 9.0 wide or greater and you don't want to rub or roll. The new Alufelgen iCarbon wheel should work when that project gets completed. That's probably what I'd do if I were you.

Most of the 19's will be pretty aggressive. VMR has some very nice looking wheels but I don't think they have anything with a very high offset. A good bit of us have 9.5 rears that are around et45 and some are lowered as far as you. It takes some fender work and tire stretching to make something like that fit but it can work. I never rub in the rear anymore but I do rub or something in the front occasionally.

08-14-2010, 12:41 PM	#1
romak47 Captain 53 Rep 941 Posts Drives: like a bat out of hell Join Date: Oct 2008 Location: SoCal iTrader: (0)	gotta get 19"s with no rubbing I have KW v2's and a 30mm drop , what 19" rims and tires can i get with no rubbing? Im assuming that at least a 50et offset in back is best since i hear thats where rubbing issues prevail? haha. __________________ JB4, DCI, Digi boost, CSL eyelids, 5% tint, KW v2's. Bastuck 85mm quad w/ berk resonated mids, LED int ltg, Perf SSK, CF int trim, 19" SF-71 rims, CDV mod, BMS OCC, ER+tial charge pipe. AR DP's, Helix IC,meth, drilled slotted rotors
	Appreciate 0 Tweet Quote

08-14-2010, 12:56 PM	#2
romak47 Captain 53 Rep 941 Posts Drives: like a bat out of hell Join Date: Oct 2008 Location: SoCal iTrader: (0)	oh yea, with a 30mm drop. What amount of camber should i get front and back?? __________________ JB4, DCI, Digi boost, CSL eyelids, 5% tint, KW v2's. Bastuck 85mm quad w/ berk resonated mids, LED int ltg, Perf SSK, CF int trim, 19" SF-71 rims, CDV mod, BMS OCC, ER+tial charge pipe. AR DP's, Helix IC,meth, drilled slotted rotors
	Appreciate 0 Quote

08-14-2010, 10:40 PM	#3
N47_Drei I plan your cities 21 Rep 123 Posts Drives: 2014 BMW 328d Join Date: Aug 2009 Location: NoVa / NYC iTrader: (0)	just "roll the fenders" and no worries
	Appreciate 0 Quote

08-15-2010, 11:30 AM	#4
Eyeman Colonel 121 Rep 2,037 Posts Drives: 2008 135 blk, blk, step Join Date: Jan 2009 Location: Atlanta, GA iTrader: (0) Garage List 1994 Porsche 968 Cab [0.00] 2017 AMG GTS [0.00] 1994 Porsche 968 Coupe [0.00] 1977 Mercedes 450SE ... [0.00] 2008 135 [8.00]	Forgestars are about all I can think of other than a custom wheel. I'd definitely look for an offset of 50 or so if the wheel is 9.0 wide or greater and you don't want to rub or roll. The new Alufelgen iCarbon wheel should work when that project gets completed. That's probably what I'd do if I were you. Most of the 19's will be pretty aggressive. VMR has some very nice looking wheels but I don't think they have anything with a very high offset. A good bit of us have 9.5 rears that are around et45 and some are lowered as far as you. It takes some fender work and tire stretching to make something like that fit but it can work. I never rub in the rear anymore but I do rub or something in the front occasionally. __________________ Injen, RR OCC, MadDad Whisper, donut spare, 19x8.5et43fr 19x9.5et45r Volk LE37's, rear fenders rolled/pulled, PSS4S 225/35fr 255/30r, KW V1's, AR coated catless dps, Cross strutbar, CF grills and license plate holder, iCarbon diffuser, ETS black anodized FMIC, M3 control arms, Quaife, ER chargepipe, ForgeDV's, Topspeed Custom Tune, V3sims, Braille, Andrey_GTA rear hub mod, Ebay Mstyle front bumper and performance style side skirts. Last edited by Eyeman; 08-15-2010 at 12:41 PM..
	Appreciate 0 Quote