BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      03-01-2011, 02:21 AM   #1
HP Autosport
Supreme Allied Commander
United_States
4101
Rep
55,898
Posts

Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

>>> HP Autosport <<< aFe Stage 2 N54 Intake

Producing 14 max horsepower and 27 lbs. x ft. torque, this radically different Stage 2 sealed cold air intake system is engineered to let maximum air in while keeping engine heat out.this intake system smoothly directs increased air flow for improved volumetric efficiency and maximum performance. So effective is the design that Intake Air Temperature (IAT) at normal running speeds with this aFe intake system is 11 degrees lower than the factory intake. Easily accessible with a satin black powdercoated aluminum cover, an washable/reusable conical air filter is enclosed in a molded plastic housing and mounted on a oval intake tube that smoothly supplies maximum air to the twin turbos. The full effect of this system cannot be felt or tested on stationary dyno and can only be fully appreciated on the wide open highway.





Order here:

https://www.hpashop.com/products/afe...cf393755&_ss=r
Attached Images
   

Last edited by HP Autosport; 08-07-2023 at 07:57 PM..
Appreciate 1
      03-01-2011, 02:33 AM   #2
BMW86
Major General
Australia
404
Rep
9,156
Posts

Drives: RS3 Sedan / Macan S
Join Date: Jul 2008
Location: Australia

iTrader: (0)

Do you have anymore photos of the intake installed?

You also clearly state that - "The full effect of this system cannot be felt or tested on stationary dyno and can only be fully appreciated on the wide open highway."

However, you have advertised that this intake gives you + 14hp and + 27tq with small picture of a dyno graph.
Appreciate 0
      03-03-2011, 12:16 PM   #3
HP Autosport
Supreme Allied Commander
United_States
4101
Rep
55,898
Posts

Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

We currently don't have more pictures but...

We've decided to sweeten the pot even more!

If you place your order with us, we will not only provide you with the discount on the aFe stg 2 intake with FREE SHIPPING, but we will also offer you one of the following:

2 FREE Bottles of Motul 600 Brake Fluid
10% off of Macht Schnell DP
20% off of Macht Schnell Air Scoops
20% off of HP Autowerks Adjustable Endlinks

Last edited by HP Autosport; 03-03-2011 at 02:51 PM..
Appreciate 0
      03-03-2011, 05:09 PM   #4
BMW86
Major General
Australia
404
Rep
9,156
Posts

Drives: RS3 Sedan / Macan S
Join Date: Jul 2008
Location: Australia

iTrader: (0)

I would really like to see pictures of how this intake implements the factory plenum.
Appreciate 0
      03-10-2011, 11:41 AM   #5
M_BYEEE
Brigadier General
M_BYEEE's Avatar
United_States
153
Rep
3,269
Posts

Drives: BSM X5M
Join Date: Oct 2009
Location: Camarillo, CA

iTrader: (7)

I'm going to be down in SB today and I was gonna check out HP. maybe they can test install it on mine
__________________
Appreciate 0
      03-10-2011, 11:51 AM   #6
M_BYEEE
Brigadier General
M_BYEEE's Avatar
United_States
153
Rep
3,269
Posts

Drives: BSM X5M
Join Date: Oct 2009
Location: Camarillo, CA

iTrader: (7)

Oh just kidding they don't even have it in stock with no eta on arrival
__________________
Appreciate 0
      03-10-2011, 01:14 PM   #7
HP Autosport
Supreme Allied Commander
United_States
4101
Rep
55,898
Posts

Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

Quote:
Originally Posted by amg135i View Post
Oh just kidding they don't even have it in stock with no eta on arrival
We may have a used one!
Appreciate 0
      03-10-2011, 07:35 PM   #8
JHOOPS2
AKA HISSMAN
JHOOPS2's Avatar
United_States
36
Rep
888
Posts

Drives: 2009 SG 135i Coupe'
Join Date: Aug 2010
Location: USA

iTrader: (5)

I have my own Dynojet 224xlc if you need an independent test done ....
__________________
(FBO) Cobb Stage 2+, AR Downpipes, Injen DCI, AA (Sport) FMIC, ER Chargepipe/Synapse BOV, Carbon fiber bits and Breyton GTS-R Wheels.
Appreciate 0
      03-22-2011, 10:09 AM   #9
Si-M240i
Major
United Kingdom
148
Rep
1,450
Posts

Drives: M240i LCI
Join Date: Aug 2008
Location: England

iTrader: (0)

How much wil this be incl shipping to the UK ?
__________________
M240i LCI (Mineral Grey):- M2 Door Mirrors, M2 Black Kidney Grills, Lower grille inserts, MP Exhaust, Dinan Carbon Fibre CAI, hot climate intake elbow
Appreciate 0
      04-23-2011, 01:48 AM   #10
HP Autosport
Supreme Allied Commander
United_States
4101
Rep
55,898
Posts

Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

Quote:
Originally Posted by Si-135i View Post
How much wil this be incl shipping to the UK ?
Replied via PM.
Appreciate 0
      04-28-2011, 09:59 PM   #11
uberschnell
Brigadier General
uberschnell's Avatar
No_Country
680
Rep
4,077
Posts

Drives: Wide Body 1
Join Date: Mar 2007
Location: Bay Area

iTrader: (48)

Excellent intake

Installed mine a few days ago - excuse the bad pics.

Absolutely love this intake. I've run Drop in, scoops, DCI, mr.5 intake. This intake has been the best performing of all of them.

Very quiet, nice bump in torque off the line. Engine definitely spools faster and no traffic heat soak like the DCI.
Attached Images
  
Appreciate 0
      05-01-2011, 04:11 PM   #12
HP Autosport
Supreme Allied Commander
United_States
4101
Rep
55,898
Posts

Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

Quote:
Originally Posted by MteK View Post
Installed mine a few days ago - excuse the bad pics.

Absolutely love this intake. I've run Drop in, scoops, DCI, mr.5 intake. This intake has been the best performing of all of them.

Very quiet, nice bump in torque off the line. Engine definitely spools faster and no traffic heat soak like the DCI.
Looks good!
Appreciate 0
      05-12-2011, 09:33 PM   #13
HP Autosport
Supreme Allied Commander
United_States
4101
Rep
55,898
Posts

Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

All intakes good in stock. Take advantage of these bundled deals or free parts!

2 FREE Bottles of Motul 600 Brake Fluid
10% off of Macht Schnell DP
20% off of Macht Schnell Air Scoops
20% off of HP Autowerks Adjustable Anti Roll Bar Endlinks



>>>>>>>>> Order Here: http://www.hpashop.com/product.sc?pr...categoryId=110
Appreciate 0
      05-15-2011, 11:13 PM   #14
1&done
Lieutenant Colonel
1&done's Avatar
United_States
248
Rep
1,584
Posts

Drives: 2011 VO 1M
Join Date: Sep 2010
Location: Jupiter, FL

iTrader: (28)

Garage List
Quote:
Originally Posted by HP Autowerks View Post
All intakes good in stock. Take advantage of these bundled deals or free parts!

2 FREE Bottles of Motul 600 Brake Fluid
10% off of Macht Schnell DP
20% off of Macht Schnell Air Scoops
20% off of HP Autowerks Adjustable Anti Roll Bar Endlinks



>>>>>>>>> Order Here: http://www.hpashop.com/product.sc?pr...categoryId=110
package price w/ some SS brakelines and I'll have to buy this intake
__________________
///1M #643 of #740
Appreciate 0
      05-17-2011, 01:04 PM   #15
kik24
Enlisted Member
2
Rep
31
Posts

Drives: 125
Join Date: May 2011
Location: SG

iTrader: (0)

Any pics on a 128i?
Appreciate 0
      05-17-2011, 02:28 PM   #16
HP Autosport
Supreme Allied Commander
United_States
4101
Rep
55,898
Posts

Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

Quote:
Originally Posted by 1&done View Post
package price w/ some SS brakelines and I'll have to buy this intake
10% off of Stoptech SS line kit added!
Appreciate 0
      05-27-2011, 03:01 AM   #17
Si-M240i
Major
United Kingdom
148
Rep
1,450
Posts

Drives: M240i LCI
Join Date: Aug 2008
Location: England

iTrader: (0)

It's much bigger than the "sales pictures" appear, which it a good thing as I was wondering if the surface area of the filter was going to be as much as a stock "drop in" one. I recon it is at least equal and probably larger, so I am warming still further to getting one on these, just need to get the shipping cost down to the UK as I will have "import tax" to pay too...... My only concern with this filter is how dirty the filter will get near the plenum intake and how fast it get dirty. When I had the Riss Racing intake it was really dirty in just a few weeks and had to rotate it and then clean after about 3 months.......that was in an "open" engine bay though, so I guess this design will certainly be better. Will it still fit with Forge DDV's in a stock Charge pipe ?
__________________
M240i LCI (Mineral Grey):- M2 Door Mirrors, M2 Black Kidney Grills, Lower grille inserts, MP Exhaust, Dinan Carbon Fibre CAI, hot climate intake elbow
Appreciate 0
      06-06-2011, 03:24 AM   #18
AWD2RWD
AWD to RWD
8
Rep
135
Posts

Drives: Lancer Evolution 9 MR
Join Date: May 2011
Location: California

iTrader: (0)

Do we have any more reviews by members besides the one in this post?
Appreciate 0
      06-06-2011, 08:33 PM   #19
sear
Lieutenant
United_States
22
Rep
462
Posts

Drives: 2007 335xi
Join Date: Sep 2009
Location: Colorado Springs

iTrader: (0)

Quote:
Originally Posted by naorgil View Post
Do we have any more reviews by members besides the one in this post?
x2
Appreciate 0
      06-12-2011, 12:15 PM   #20
evilstib
Bimmer Newbie
Canada
29
Rep
312
Posts

Drives: CSM N54 Prem/Comf/Sound
Join Date: Aug 2010
Location: Bear's Ass Canada! (Fort Mac)

iTrader: (0)

Anyone actually Dyno one of these yet? I don't believe the claims of 14HP & 27 tq.

If it was true, I'd buy one right away!!!

Someone PLZ dyno this!
Appreciate 0
      06-12-2011, 12:45 PM   #21
C4747Z
Second Lieutenant
C4747Z's Avatar
United_States
12
Rep
221
Posts

Drives: VO 1M & M5 Competition
Join Date: Oct 2008
Location: Long Island, NY

iTrader: (0)

How does this intake compare to the DCI aFe intake?
Appreciate 0
      06-16-2011, 11:56 PM   #22
HP Autosport
Supreme Allied Commander
United_States
4101
Rep
55,898
Posts

Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

Quote:
Originally Posted by C4747Z View Post
How does this intake compare to the DCI aFe intake?
Sealed against engine heat.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:04 AM.




1addicts
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST