Rear M3 lower camber arm conversion questions

spxxx · 02-05-2018, 07:18 PM

I ordered the bolts for this conversion based on RealOEM but the bolt for the knuckle is too short. Running a class 8.8 bolt from OSH for now but really want to the correct bolt in class 10.9 form.

Who else has done this and has the correct part #?

Thanks in advance!

tracer bullet · 02-05-2018, 07:49 PM

Not me, sorry. But thought I'd mention that if you don't figure it out soon, a place like HP Autosport might have them, or if you've got diameter & length McMaster-Carr might have something equivalent.

Good luck -

spxxx · 02-05-2018, 07:52 PM

Quote:

Originally Posted by tracer bullet

Not me, sorry. But thought I'd mention that if you don't figure it out soon, a place like HP Autosport might have them, or if you've got diameter & length McMaster-Carr might have something equivalent.

Good luck -

Yeah I'm surprised that realOEM didn't have the right part numbers. It's a pretty standard bolt 14x1.5x120mm class 10.9

justpete · 02-09-2018, 06:19 PM

I just bought a complete kit from Harold at HP Autosport, had all the BMW parts required to install the lower camber arms.

Suprgnat · 02-09-2018, 09:53 PM

Quote:

Originally Posted by spxxx

Yeah I'm surprised that realOEM didn't have the right part numbers. It's a pretty standard bolt 14x1.5x120mm class 10.9

If it helps.

spxxx · 02-09-2018, 11:58 PM

Quote:

Originally Posted by Suprgnat

Quote:

Originally Posted by spxxx

Yeah I'm surprised that realOEM didn't have the right part numbers. It's a pretty standard bolt 14x1.5x120mm class 10.9

If it helps.

It sure does!! Thank you sir

02-05-2018, 07:18 PM	#1
spxxx Boost 1354 Rep 3,692 Posts Drives: 135i M-Sport Join Date: Feb 2014 Location: Valley of Silicon, CA - United States iTrader: (9)	Rear M3 lower camber arm conversion questions I ordered the bolts for this conversion based on RealOEM but the bolt for the knuckle is too short. Running a class 8.8 bolt from OSH for now but really want to the correct bolt in class 10.9 form. Who else has done this and has the correct part #? Thanks in advance! __________________ F80 M3 TrackBoi, Z4MC GarageBoi, 1M Clone StreetBoi
	Appreciate 0 Tweet Quote

02-05-2018, 07:49 PM	#2
tracer bullet Brigadier General 2413 Rep 3,549 Posts Drives: '11 135i , '15 X3 35i Join Date: May 2011 Location: Saint Paul, MN iTrader: (1)	Not me, sorry. But thought I'd mention that if you don't figure it out soon, a place like HP Autosport might have them, or if you've got diameter & length McMaster-Carr might have something equivalent. Good luck -
	Appreciate 0 Quote

02-09-2018, 06:19 PM	#4
justpete Brigadier General 1233 Rep 3,778 Posts Drives: '11 328i '19 M6 Join Date: Jan 2012 Location: DFW iTrader: (0) Garage List 2019 BMW M6 [10.00] 2011 BMW 328i [9.00]	I just bought a complete kit from Harold at HP Autosport, had all the BMW parts required to install the lower camber arms. __________________ 2011 E90 328i 6MT, BMW Aero, CF hood/boot, PI+CAI+RM+3IM+BPC, SS+CI528+ThermoTec+SS#1+2XBurns, AKG 75D eng/trans, Al/Delrin diff/RS, CM 850, UCP, CAE, AKG DSSR, DiffsOnline 3.91 30/90 LSD+BW cooler, C&R, Setrab, Accusump, AST 3-way+Swift, Aurora PR+BW spherical, Vorshlag CPs, M3 brace+UR bar, ARC-8 18x8.5, 255 R1R, RB/CSL rotors+cooling, 135i calipers, RS29, RT700, Safecraft, OMP HTE-R+804F+QD Superquadro, 6pt cage+FIA, Braille, RT DL1Mk3
	Appreciate 0 Quote