|
|
|
11-11-2009, 09:04 PM | #23 |
Coming Soon
254
Rep 960
Posts |
For most people, the alignment pin must be drilled out, just FYI. Its not a separate removable pin but rather a bubble in the top of the strut hat.
|
Appreciate
0
|
11-12-2009, 08:40 PM | #24 |
AutoXer
34
Rep 683
Posts |
That's how it was on my 09. All one piece, so out came the drill and file.
__________________
2009 135i, Alpine White, 6MT, M-Sport, iDrive, iPod/USB, Heated Seats, Premium Sound, BMW Assist
|
Appreciate
0
|
01-23-2010, 09:32 AM | #25 |
Captain
111
Rep 810
Posts |
I took a hacksaw to mine and it came off EASILY. Then I used a file to remove any small burrs, although that really wasn't needed. Took no more than 30 seconds.... No joke.
|
Appreciate
0
|
08-17-2010, 10:03 AM | #26 |
Lieutenant
38
Rep 566
Posts |
I keep popping this thread up on different searches, and finally felt the need to add to it.
For those without the "screw-out" type alignment pins. Don't bother drilling or cutting. Take a drift-punch or similar device (medium-point works well), put a rag around the area in case you slip, hold the punch on the alignment pin, then give it (the drift punch) a good whack with a (metal) hammer. This is the factory shopbook referenced method BMW uses to remove them (quote: "twist/drive out centering pin"), and it works really well/easily. They are designed to pop out with force from the top. Less than 30 seconds, easier than any other methods. :-P (Note that this should be done with everything ON the car; if you are doing suspension work and have the suspension removed, don't try whacking it out with a hammer, as you'll likely bend the weak ring at the top of the strut mounting hat.)
__________________
|
Appreciate
1
123i25.00 |
12-01-2010, 07:15 PM | #28 |
Private First Class
1
Rep 115
Posts |
|
Appreciate
0
|
01-24-2012, 09:54 PM | #29 |
First Lieutenant
28
Rep 381
Posts |
true!
__________________
2013 BMW X1 * 1973 Clubman GT * 2016 Mazda MX5 * 2000 Honda S2000 2004 BMW 325i Touring * 2009 BMW X5 3.0xdrive |
Appreciate
0
|
01-24-2012, 09:57 PM | #30 |
First Lieutenant
28
Rep 381
Posts |
I'll do this later! Awesome
__________________
2013 BMW X1 * 1973 Clubman GT * 2016 Mazda MX5 * 2000 Honda S2000 2004 BMW 325i Touring * 2009 BMW X5 3.0xdrive |
Appreciate
0
|
01-25-2012, 07:21 AM | #31 | |
European Editor
10589
Rep 22,992
Posts |
Quote:
+1. Great advice. Danke. |
|
Appreciate
0
|
01-25-2012, 04:34 PM | #32 |
First Lieutenant
28
Rep 381
Posts |
I could not pull it out and I could not hammer it in. I will drill it out later
__________________
2013 BMW X1 * 1973 Clubman GT * 2016 Mazda MX5 * 2000 Honda S2000 2004 BMW 325i Touring * 2009 BMW X5 3.0xdrive |
Appreciate
0
|
03-07-2013, 03:31 AM | #33 | |
midnight modder
6
Rep 81
Posts |
Quote:
__________________
COBB Race E30, CDV Mod, Pedal Stop Mod, KW V2, M3 control arms and 28mm Frt Sway, Helix FMIC, AR DPs, DCIs, ER Chargepipe/Tial BOV, Agency Power Mids, CPe axleback exhaust, BMS 4LED Angel Eyes, BMW Perf CF mirror caps, Bimmian Amber Delete, Alufegen SF71 Hankook Ventus[/FONT]
|
|
Appreciate
0
|
03-31-2013, 07:25 PM | #35 |
Just one more taste...
566
Rep 2,011
Posts |
Will toe change significantly with this mod?
__________________
My Build Thread: Jet Black 6MT 128i with MSport
|
Appreciate
0
|
04-01-2013, 04:20 PM | #36 |
Captain
1401
Rep 778
Posts |
In round numbers, -1 degree change in camber will change the total toe by 1/4" out on the 1 series.
I believe you only get about -1/4 degree camber change by pulling the pin so the toe change will be on the order of 1/16" out. That is probably a good thing. You are certainly safe trying it to see if you like the results without worrying about having to take the car in for an alignment immediately. |
Appreciate
0
|
04-02-2013, 08:40 AM | #37 | |
Work hard, play harder
14
Rep 261
Posts |
Quote:
Cheers, Bryan
__________________
2011 135i M Sport | COBB V3 AP Stage 1+ | ER FMIC and CP | BMS OCC | Dinan Stage 3 Suspension | Dinan High Performance Bushing Kit | M3 Wishbones | Modified CDV | Clutch Stop | APEX EC-7 Wheels w/ Michelin PSS 235/40R18 265/35R18 Tires | Maddad Street Series Exhaust | BMW Performance Kidney Grills | LCI Blacklines | Armrest Delete | Spoiler Delete | 28% Tint
|
|
Appreciate
0
|
04-04-2013, 01:25 AM | #38 |
Enlisted Member
0
Rep 37
Posts |
These pins do get stuck a lot and the ones with no hex hole get knocked out with a punch. This mod will usually add -20-30 min or -.3-.5 deg the adjustment is really there to move the strut mount positive up to +50min or +.9deg. If you do this your front toe will change toe out to an estimated -9 min positive from a +.2 reg +.8 sport suspension.
Also if you are wanting a more aggressive setup just take your car for an alignment and let them know nothing says you can't make requests. |
Appreciate
0
|
04-04-2013, 12:33 PM | #39 | |
Colonel
85
Rep 2,438
Posts |
Quote:
|
|
Appreciate
0
|
04-04-2013, 07:05 PM | #40 |
Enlisted Member
0
Rep 37
Posts |
Have an alignment completed and just tell them what you want, some shops will have you sign something stating you know you will have increased tire wear just cover themselves.
|
Appreciate
0
|
04-05-2013, 08:49 PM | #41 |
California-bound
385
Rep 1,480
Posts |
Alright, I want to chime in on this thread with my experiences. My car has the later-style pins that need to be tapped out. I didn't have a drill handy, so I just used a flathead screwdriver + hammer and hit the pins at their bases. The driver's side took longer, maybe I was being a wuss with the hammer, but once I had the hang of it, the passenger-side literally took 1 minute to knock the pin out, and adjust the strut. There looked to be a fair bit of movement accomplished by doing this. Here are some pictures showing how much I was able to get out of the car by myself. I figure if I had a second set of hands to manhandle the strut tops, that there's a teeny bit left in it, in terms of available camber. Well worth the 30 minute time investment.
This also gave me an excuse to fab up my own little temporary jackpad so I wouldn't damage the jack points on these cars, it's not pretty, but it is quite functional, and the under-car mount points still look pristine. If anyone needs a hand doing this, and is in the Central Ohio area, give me a shout, we can knock it out (pun intended) in no time. Looks like the passenger side had more to give, which is fine, because it helps balance out with the weight of the driver. I plan on getting the alignment checked to make sure my toe isn't super out of whack, I will report back with camber/toe/caster numbers. Pictures: Driver's Side: Passenger Side: Homebrew jackpad, wooden block layered with duct tape:
__________________
Streets of Willow: 1:27.7 CW 11/15/15; 1:29.5 CCW 8/15/15 |||| Autoclub Speedway ROVAL (CCW): 1.52.6 - 12/2/17
Willow Springs - Big Willow (CW): 1:35.8 - 3/31/18 |||| Buttonwillow #13 (CW): 1:59.3 1/27/18 https://www.facebook.com/JakeStumphRacing |||| http://www.youtube.com/user/RaceMeMZ3 |
Appreciate
1
123i25.00 |
04-16-2013, 10:37 PM | #42 |
First Lieutenant
32
Rep 326
Posts |
Is it true that removing these pins will cause too much play, and you will need to get alignments often and can lead to problems in the long run?
__________________
E92 335i 6MT | Jet Black | Saddle Brown
COBB AP | VRSF Catless D.P's | BMS DCI | BMW Performance 313 Rims | Gloss Black Kidney Grills | LUX V8 V3's | WeissLicht PY24W |
Appreciate
0
|
04-17-2013, 12:08 AM | #43 |
Enlisted Member
0
Rep 37
Posts |
Alignment pins are only there for guiding the strut mount to the proper position on install. It is required to remove them when adjusting front camber also the struts will not move when properly tightened down after adjusting camber.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|