Stock style 264 wheels up front

sizablepants · 02-09-2022, 06:51 PM

If anyone was wondering, you can fit a set of rear 264's up front with a 12.5 mm spacer. This allows you to have a square setup with a little fender rolling.

Joseg0715 · 05-16-2022, 08:45 AM

How much camber are you running up front, and what tires are on the wheels?

sizablepants · 06-08-2022, 03:50 PM

Joseg0715 I was running stock suspension so I was limited to about -.8 degrees of negative camber. (removing the strut tower guides and sliding the strut as far inward as possible is the only way to achieve more camber on the stock suspension.)
I am running 255 michelin PS4S on all corners

sizablepants · 06-08-2022, 03:53 PM

I have upgraded to the BCracing BR series coilovers and I had to use a 15MM spacer up front to clear the beefier diameter of these coilovers compared to the stock suspension. I have the camber maxed out on the coilovers but haven't gotten an alignment yet so I dont know the exact numbers but havent experienced any rubbing yet up front which is great. The fitment is also perfect, I couldn't be happier with the setup.

Joseg0715 · 07-04-2022, 10:08 AM

Do you have pictures of your fitment and setup?

02-09-2022, 06:51 PM	#1
sizablepants Private 9 Rep 56 Posts Drives: '08 135i @Driving_This_Daily Join Date: Dec 2019 Location: Los Angeles iTrader: (0)	Stock style 264 wheels up front If anyone was wondering, you can fit a set of rear 264's up front with a 12.5 mm spacer. This allows you to have a square setup with a little fender rolling.
	Appreciate 3 tracer bullet2405.50 bnace10144.50 Petro135452.50 Tweet Quote

05-16-2022, 08:45 AM	#2
Joseg0715 Enlisted Member 2 Rep 39 Posts Drives: 09 135i Join Date: Feb 2021 Location: Tucson, AZ iTrader: (0)	How much camber are you running up front, and what tires are on the wheels?
	Appreciate 0 Quote

06-08-2022, 03:50 PM	#3
sizablepants Private 9 Rep 56 Posts Drives: '08 135i @Driving_This_Daily Join Date: Dec 2019 Location: Los Angeles iTrader: (0)	Joseg0715 I was running stock suspension so I was limited to about -.8 degrees of negative camber. (removing the strut tower guides and sliding the strut as far inward as possible is the only way to achieve more camber on the stock suspension.) I am running 255 michelin PS4S on all corners
	Appreciate 0 Quote

06-08-2022, 03:53 PM	#4
sizablepants Private 9 Rep 56 Posts Drives: '08 135i @Driving_This_Daily Join Date: Dec 2019 Location: Los Angeles iTrader: (0)	I have upgraded to the BCracing BR series coilovers and I had to use a 15MM spacer up front to clear the beefier diameter of these coilovers compared to the stock suspension. I have the camber maxed out on the coilovers but haven't gotten an alignment yet so I dont know the exact numbers but havent experienced any rubbing yet up front which is great. The fitment is also perfect, I couldn't be happier with the setup.
	Appreciate 0 Quote

07-04-2022, 10:08 AM	#5
Joseg0715 Enlisted Member 2 Rep 39 Posts Drives: 09 135i Join Date: Feb 2021 Location: Tucson, AZ iTrader: (0)	Do you have pictures of your fitment and setup?
	Appreciate 0 Quote