|
|
|
02-28-2009, 07:24 AM | #1 |
EVO
7
Rep 193
Posts |
headlight lens or whole headlight?
if I broke hight light lens, do I need replace the whole headlight or just the headlight lens cover? and how much it will cost?
thanks!!
__________________
135 EVO
|
02-28-2009, 09:50 AM | #2 |
Brigadier General
295
Rep 3,350
Posts |
RealOEM does not show a part number just for the lens. It shows that the lens is attached to the unit with 8 torx screws. Best check with BMW on that.
No. Description Supplement Qty From Up To Part Number Price Notes 01 BULB H8 12V 35W 2 63217160782 $22.10 02 GASKET, HEADLIGHT, LEFT 1 63117187861 02 GASKET, HEADLIGHT, RIGHT 1 63117187862 03 HEAD LIGHT VERTICAL AIM CONTROL 2 63116938563 04 SUPPORT 2 63126924671 05 BRACKET HEADLIGHT LEFT 1 63126940663 05 BRACKET HEADLIGHT RIGHT 1 63126940664 06 BULB SOCKET, TURN INDICATOR 2 63126940665 07 BULB SILVER 12V 21W 2 63217160897 $16.74 FOR VEHICLES WITH XENON LIGHT = NO OR ADAPTIVE HEADLIGHTS = NO S522A=NO S524A=NO 07 CONVERSION KIT, BULBS, SILVER 1 63120420391 +core 08 FILLISTER HEAD SCREW ISA M6X18 4 41618172499 ENDED 08 TORX BOLT ISA M6X18 SW 4 07146959923 $0.50 09 HEX BOLT M6X35 4 07119905188 10 STICK-ON LABEL XENON-LIGHT . 2 63128362473 ENDED 10 STICK-ON LABEL XENON-LIGHT 2 03/2008 71237165545 $1.56 10 STICK-ON LABEL XENON-LIGHT 2 71237211223 11 LEFT HEADLIGHT COVER 1 63127171569 11 RIGHT HEADLIGHT COVER 1 63127171570 12 BULB H3 55W 2 63217160779 $11.72 13 BULB XENON LIGHT WITH IGNITION ELEMENT D1S 2 63217162862 $217.62 14 CONTROL UNIT XENON LIGHT 2 63117180050 16 REPAIR KIT FOR HEADLIGHT LEFT AND RIGHT 1 63116924482 17 ELECTRONICS BOX ALC UNCODED 2 63117180829 Notes: +core = plus core charge. ENDED = The part has been discontinued |
Appreciate
0
|
02-28-2009, 07:33 PM | #3 | |
EVO
7
Rep 193
Posts |
Quote:
__________________
135 EVO
|
|
Appreciate
0
|
03-01-2009, 01:32 AM | #6 |
↓↓↓ Ex-Con ↓↓↓
34
Rep 1,874
Posts |
If I remember correctly, you can order new lenses from a European dealer but then you still have to figure out how to get the old lens off without destroying the housing.
|
Appreciate
0
|
03-01-2009, 02:43 AM | #7 |
EVO
7
Rep 193
Posts |
I think i should polish it. thats the easiest way to make the lens better..
__________________
135 EVO
|
Appreciate
0
|
03-01-2009, 07:19 AM | #8 |
Banned
23
Rep 105
Posts |
Hi!
Polishing will not work. The material is polycarbonat, which was hardcoated! You could get a new set from me. What do you need? Which side? Please give me the org. part number an your light and, if possible, a picture. |
Appreciate
0
|
03-01-2009, 07:46 AM | #9 | |
EVO
7
Rep 193
Posts |
Quote:
but anyway if you want sell yours please pm me.
__________________
135 EVO
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|