WTB: Performance front bumper

[decre83]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

hi,

im looking to buy a performance front bumper in any color!!

[E82driver]

Originally Posted by decre83

hi,

im looking to buy a performance front bumper in any color!!

+1 on that brotha!

[Divbetic]

Going to be hard to find a used one in decent shape but if you're willing to buy new I believe there were still a couple left in Germany last time I checked. (No PDC/No HLW) It's not possible to order the kit anymore but you can still piece it together through your dealer if you know the PN's. I just finished piecing mine together and it looks killer! Let me know if you have any questions.

[decre83]

in germany in which website? where did you buy yours?

[Divbetic]

Originally Posted by decre83

in germany in which website? where did you buy yours?

No website, you'll have to contact your dealer to have them check inventory in Germany. Turner Motorsport was able to check quantity remaining but I actually got a cheaper quote from my dealer. I was able to inspect the part at pickup there and they let me know if I found any damage that BMW would have given me a replacement. However, I did order the remaining trim through Turner because most of it was 15% off at the time.

[decre83]

ill check with my dealer

do you by any instance have the PN of the bumper and all the parts needed for installation?

[Divbetic]

I used the Mod Bargains website to piece mine together. It wont let me link to the website but Google "Mod Bargains e82 performance bumper" and it should pop up.
The bumper part number has 4 versions which could affect availability and price.
1. No PDC/No HLW
2. No PDC/With HLW
3. With PDC/No HLW
4. With PDC/With HLW

[decre83]

mine would be without pdc and without washers

is it expensive to buy from the dealer? i dont know how much this bumper sells for since its an old part, 2013 or so its the last year the e82 was produced

[MrKevinRosales]

Originally Posted by Divbetic

Going to be hard to find a used one in decent shape but if you're willing to buy new I believe there were still a couple left in Germany last time I checked. (No PDC/No HLW) It's not possible to order the kit anymore but you can still piece it together through your dealer if you know the PN's. I just finished piecing mine together and it looks killer! Let me know if you have any questions.

I did the same recently. No problem getting the parts.
Mine has the headlight washers and no PDC

[Divbetic]

Originally Posted by MrKevinRosales

I did the same recently. No problem getting the parts.
Mine has the headlight washers and no PDC

Now if only there was a way to do this with the Aero side skirts!

[MrKevinRosales]

Originally Posted by Divbetic

Now if only there was a way to do this with the Aero side skirts!

I did, I was lucky enough that a member pointed me to an open box set on ebay and I purchased instantly. Have not seen another set since.

[Divbetic]

Originally Posted by MrKevinRosales

I did, I was lucky enough that a member pointed me to an open box set on ebay and I purchased instantly. Have not seen another set since.

I did the same thing a few months back but the seller must have realized what he had and never shipped out. Hoping that I'll get another chance to complete the set during my ownership

[carscatscoffee15]

Originally Posted by Divbetic

Going to be hard to find a used one in decent shape but if you're willing to buy new I believe there were still a couple left in Germany last time I checked. (No PDC/No HLW) It's not possible to order the kit anymore but you can still piece it together through your dealer if you know the PN's. I just finished piecing mine together and it looks killer! Let me know if you have any questions.

Hey I'm considering doing this front bumper and wanted to know the part numbers needed for a 2013 128i

How many parts are needed for this to be done?

[Divbetic]

Originally Posted by carscatscoffee15

Hey I'm considering doing this front bumper and wanted to know the part numbers needed for a 2013 128i

How many parts are needed for this to be done?

Shouldn't be too many if you reuse your original hardware and aren't planning on adding an oil cooler in the future. If you don't have an m-sport, you'll need the adapter piece to make the holes underneath line up. (I bought this piece brand new on accident when I was doing my swap and still have it if you or anyone else end up needing one.)

[Afam28]

https://www.ecstuning.com/b-genuine-...51110432374kt/


Entire kit...

[carscatscoffee15]

Originally Posted by Divbetic

Shouldn't be too many if you reuse your original hardware and aren't planning on adding an oil cooler in the future. If you don't have an m-sport, you'll need the adapter piece to make the holes underneath line up. (I bought this piece brand new on accident when I was doing my swap and still have it if you or anyone else end up needing one.)

hey I'll take the adapter if you still have it.. what is the part number for that if you don't mind

The M Performance bumper is listed on some sites to be up to cars produced to 9/12

my vehicle was produced 7/13.. will the kit still fit?

Does anyone know if I could put the 135 cooling ducts in there as well or would that be pointless on a 128 unless I got the 135 wheel/fender liners for the ducting..