|
|
|
08-27-2020, 01:52 PM | #1 |
New Member
0
Rep 5
Posts |
3rd outlet in charge pipe.
My 2008-135i-N54 still has the plastic Charge pipe,which I understand give problems.I was going to upgrade to a metal pipe before I added boost or any power upgrade.Problem is none of the pipes I see has a large outlet between the stock diverters.It is about a 1 1/2 in hose tied in and goes to back of engine.do I just deal this off.Thanks in advance for advice.
|
08-27-2020, 09:54 PM | #2 |
Captain
453
Rep 610
Posts
Drives: 2008 135i E88
Join Date: Aug 2019
Location: South jersey
|
It should look like this.
Aftermarket chargepipe has the diverter holes, the map sensor hole and the closed up meth bungs on some |
Appreciate
0
|
08-28-2020, 02:56 AM | #3 |
Commander ;)
185
Rep 115
Posts |
I think you may be referring to the sound generator. It's a tube connected to the CP between the DVs.
https://www.1addicts.com/forums/showthread.php?t=741784 Aftermarket CP won't have or need this piece.
__________________
2009 N54 1er Cabrio
2021 C8 Stingray Z51 2022 Audi Q3 |
Appreciate
0
|
08-28-2020, 06:09 AM | #4 | |
New Member
0
Rep 5
Posts |
Quote:
|
|
Appreciate
0
|
08-28-2020, 09:12 AM | #5 | ||
Commander ;)
185
Rep 115
Posts |
Quote:
You can go with a CP that uses stock or aftermarket DVs, or get one that uses a BOV. Tial Q seems to be the most popular BOV on the forum, but you can use HKS, Turbosmart, etc. Watch videos and pick one that sounds best to you! With a CP and BOV, you'll cap off the 2 holes that the stock DV hoses go back to, easy install. Check the DIY section or search for YouTube CP installs. Good luck!
__________________
2009 N54 1er Cabrio
2021 C8 Stingray Z51 2022 Audi Q3 |
||
Appreciate
0
|
Post Reply |
Bookmarks |
|
|