Dyno'ed my 135

[KidRobot]

After doing all the performance upgrades that I intend to do (for awhile), I decided to finally run some tests of my car to get some numbers.

My friend from BMW referred me to Definitive Tuning up in Newmarket. They run a Dynapack wheel dyno, not a roller dyno, which from what I've read, is a bit more accurate, by eliminating factors like traction, etc.

I don't have a lot of goodies, only a BMS DCI, RR downpipe-back exhaust, and a PROcede tune.

Here's a vid I made of the session :

If you don't care to watch the whole vid, the final max numbers I got was

340 WHP & 405 lb/ft

All in all, I'm impressed & satisfied with these numbers. I can probably squeeze out a few more ponies with a downpipe and FMIC upgrade.

Anyhoo....just thought I'd share.

[dread1]

track it. i did the dyno game no fun if you can't run down anything

great number but if ya don't know how to put it down might as well drive a 128

[135IS]

TRACK IT. i have about the same power output and first gear spins all day unless you get some DR's (Y)

[CDN_135i]

Wow, impressive numbers. Im looking at getting the same mods for next spring. Do you autoX at all?

[KidRobot]

No, no auto-x for me.

I'll go to a drag strip just to get some 1/4 times, then concentrate on track days.