BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      03-27-2022, 09:28 AM   #1
motopsycha
New Member
United_States
14
Rep
28
Posts

Drives: 128i coupe
Join Date: Aug 2018
Location: MN

iTrader: (0)

Update— replaced dme relay and it looks to have resolved the issue.

Looking for some help. Had a crank but no start issue yesterday. The car had been sitting for 5 days at the airport but started fine and we drove home, about a 20 min drive. A couple hours later it would not start.

I ran the codes and got the following:

2A3F
2ACC
2ACB
2AB6

A0B4
A0B3


I tried clearing them but they returned and the car would not start. I put a battery charger on it for the night and went to bed.

This AM I dug back in and again had the crank but no start situation. I ran the scan again and had the same codes. I tried a couple more times to clear them and eventually had some success. The first codes to clear were the 2A3F and 2ACC. Then 2ACB cleared and eventually 2AB6. At this point the car started.

This has happened twice before, both times after sitting outside in the cold and I thought it was battery related. I replaced the battery after the 2nd time and thought the issue was behind me. Now it has happened again and right after starting and driving so I am stumped.

Could it be an intermittent failure of the DME relay? Something else?
Appreciate 0
Post Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 02:35 PM.




1addicts
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST