BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      08-28-2018, 10:38 PM   #1
PeterY
Lieutenant
PeterY's Avatar
Australia
109
Rep
510
Posts

Drives: Graphite E92 335i N54 6MT
Join Date: Jan 2012
Location: Melbourne, Australia

iTrader: (0)

Garage List
2007 BMW 335i  [0.00]
Wink Garage cleanup (stock parts)

Cleaning up my garage and selling a few stock parts that came off my car over the last few years.

-Located in Kew, VIC 3101.

1- Stock downpipes - SOLD

2- Stock intercooler - $140

Both inlets and outlets have been plugged with nitrile gloves while in storage to prevent dust/foreign objects from going inside.

3- Set of 10 control arms -$130

Good opportunity for someone to grab them and press-in M3 bushing or ball-joints, and you got yourself cheap M3 control arms.

Control arms from bottom to top (in the picture below):
-2x Tension strut (front)
-2x Upper control arm (front)
-2x Guide rods (rear)
-2x Upper camber arm (rear)
-2x Toe-arms (rear)


4- Stock oil cooler lines to suit N54 and N55 E9X 335i - SOLD

Note that this part is different between 135i and 335i even if using the same engine (these will only suit E9X 335i N54 and N55 cars), brand new price from overseas is $500 AUD delivered, I had the intension to modify their ends to make them suitable to fit standard -8AN fittings and install a bigger aftermarket oil cooler, but never got around to doing it.

5- Genuine BMW N54 valve cover - SOLD

Will suit any N54 powered vehicle, I have cleaned it from any oil traces to make it suitable for shipping, and I have closely inspected it for cracks, there are no cracks! These are $600 AUD delivered from Schmiedmann in Europe, and around $900 from local BMW dealerships. Comes with bolts and gasket, but keep in mind that you need a new bolt set (aluminium bolts are one time use only according to ISTA+), and you need a new valve cover gasket before installing on your car (I would never re-use a gasket, they're only $60 from memory).

Pictures:








__________________
Sparkling Metallic Graphite 335i Coupe 6MT (Build Thread) | MHD Stage 2+ | Wagner EVO2 FMIC | Íhlins R&T coilovers with 7/12 Swift springs | Dinan Camber Plates | Rear HardRace fully ball-jointed toe arms, upper camber arms and guide rods | Front M3 control arms with Monoballs ball-joints | M3 Steering rack with servotronic retrofit | E93 M3 Front & Rear Sway Bars | Nolathane rear subframe bushings | HEL Performance SS braided brake lines | 19" BMW 313 Rims | BMW P Steering Wheel | CIC+Combox retrofit

Last edited by PeterY; 01-22-2019 at 09:06 AM.
Appreciate 0
      08-29-2018, 11:52 PM   #2
xQx
General
Australia
724
Rep
899
Posts

Drives: 2008 BMW 135i (E88 N54 6AT)
Join Date: Aug 2016
Location: Sunshine Coast QLD Australia

iTrader: (0)

PM Sent about the valve cover.
__________________
2008 BMW 135i Convertible 6AT (E88 N54) M Sport (BMS DCI, VRSF 7" Intercooler, VRSF CP, VRSF v2 DP, Turbosmart BOV, SmartTop Module, xHP Stage 3, BMS Cowl Filters, 2" Inlets & Outlets, MPP TD04/16T Turbos, MFactory 1.5way LSD, Fuel-it Stage 2+ Bucketless)
Appreciate 0
      09-01-2018, 05:51 PM   #3
PeterY
Lieutenant
PeterY's Avatar
Australia
109
Rep
510
Posts

Drives: Graphite E92 335i N54 6MT
Join Date: Jan 2012
Location: Melbourne, Australia

iTrader: (0)

Garage List
2007 BMW 335i  [0.00]
Valve cover sold, pending payment.
__________________
Sparkling Metallic Graphite 335i Coupe 6MT (Build Thread) | MHD Stage 2+ | Wagner EVO2 FMIC | Íhlins R&T coilovers with 7/12 Swift springs | Dinan Camber Plates | Rear HardRace fully ball-jointed toe arms, upper camber arms and guide rods | Front M3 control arms with Monoballs ball-joints | M3 Steering rack with servotronic retrofit | E93 M3 Front & Rear Sway Bars | Nolathane rear subframe bushings | HEL Performance SS braided brake lines | 19" BMW 313 Rims | BMW P Steering Wheel | CIC+Combox retrofit
Appreciate 0
      09-12-2018, 10:39 AM   #4
PeterY
Lieutenant
PeterY's Avatar
Australia
109
Rep
510
Posts

Drives: Graphite E92 335i N54 6MT
Join Date: Jan 2012
Location: Melbourne, Australia

iTrader: (0)

Garage List
2007 BMW 335i  [0.00]
Bump, valve cover and downpipes sold, intercooler, control arms set and oil cooler lines left
__________________
Sparkling Metallic Graphite 335i Coupe 6MT (Build Thread) | MHD Stage 2+ | Wagner EVO2 FMIC | Íhlins R&T coilovers with 7/12 Swift springs | Dinan Camber Plates | Rear HardRace fully ball-jointed toe arms, upper camber arms and guide rods | Front M3 control arms with Monoballs ball-joints | M3 Steering rack with servotronic retrofit | E93 M3 Front & Rear Sway Bars | Nolathane rear subframe bushings | HEL Performance SS braided brake lines | 19" BMW 313 Rims | BMW P Steering Wheel | CIC+Combox retrofit
Appreciate 0
      11-25-2018, 12:28 AM   #5
PeterY
Lieutenant
PeterY's Avatar
Australia
109
Rep
510
Posts

Drives: Graphite E92 335i N54 6MT
Join Date: Jan 2012
Location: Melbourne, Australia

iTrader: (0)

Garage List
2007 BMW 335i  [0.00]
Valve cover, downpipes and oil cooler lines have sold.

Control arms set and stock intercooler are still available.
__________________
Sparkling Metallic Graphite 335i Coupe 6MT (Build Thread) | MHD Stage 2+ | Wagner EVO2 FMIC | Íhlins R&T coilovers with 7/12 Swift springs | Dinan Camber Plates | Rear HardRace fully ball-jointed toe arms, upper camber arms and guide rods | Front M3 control arms with Monoballs ball-joints | M3 Steering rack with servotronic retrofit | E93 M3 Front & Rear Sway Bars | Nolathane rear subframe bushings | HEL Performance SS braided brake lines | 19" BMW 313 Rims | BMW P Steering Wheel | CIC+Combox retrofit
Appreciate 0
      01-22-2019, 09:09 AM   #6
PeterY
Lieutenant
PeterY's Avatar
Australia
109
Rep
510
Posts

Drives: Graphite E92 335i N54 6MT
Join Date: Jan 2012
Location: Melbourne, Australia

iTrader: (0)

Garage List
2007 BMW 335i  [0.00]
Bump!
__________________
Sparkling Metallic Graphite 335i Coupe 6MT (Build Thread) | MHD Stage 2+ | Wagner EVO2 FMIC | Íhlins R&T coilovers with 7/12 Swift springs | Dinan Camber Plates | Rear HardRace fully ball-jointed toe arms, upper camber arms and guide rods | Front M3 control arms with Monoballs ball-joints | M3 Steering rack with servotronic retrofit | E93 M3 Front & Rear Sway Bars | Nolathane rear subframe bushings | HEL Performance SS braided brake lines | 19" BMW 313 Rims | BMW P Steering Wheel | CIC+Combox retrofit
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -5. The time now is 03:58 PM.




1addicts
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST