Square Setup on stock 135i

Bama335 · 03-20-2014, 06:04 PM

Quote:

Originally Posted by NickDHdfc

No there were no spacers on the car, all stock oem suspension. I dont understand how it wasnt rubbing against the strut but it all seemed fine. I recently changed to 225/40 and 255/35 in the rear.

thanks - what tires did it have on it when you bought it?

I'm leaning towards 225/245 to get it as close to square as possible on the stock rims

fe1rx · 03-20-2014, 07:19 PM

Quote:

Originally Posted by Bama335

I'm leaning towards 225/245 to get it as close to square as possible on the stock rims

The closest you can get to square is square - 225 all around.

PrematureApex · 03-21-2014, 08:58 AM

You can run a 235/40-18 up front on the stock front wheel.

It's technically outside the recommended range for most tires, but it was a stock wheel/tire-width/aspect ratio on the E36 M3 (235/40-17 on a 7.5")

03-21-2014, 08:58 AM	#25
PrematureApex Colonel 840 Rep 2,402 Posts Drives: N55 X1, N54 135, s54 m3 Join Date: Jan 2008 Location: Philadelphia iTrader: (0)	You can run a 235/40-18 up front on the stock front wheel. It's technically outside the recommended range for most tires, but it was a stock wheel/tire-width/aspect ratio on the E36 M3 (235/40-17 on a 7.5")
	Appreciate 0 Quote