Official Random Picture of Your Car Thread

[Esteban]

Good looking 1er.

[Gambeez]

Originally Posted by Esteban

Good looking 1er.

Thank you!

1M rear bumper just got home from the shop. Had the diffuser painted gloss black to match the rest of the gloss black trim. Really can’t wait to put this sucker on tomorrow but unfortunately the weather is awful where I live today.

Pictures inbound tomorrow after install and possibly getting the quad exhaust done.

[Boosted135i]

Wrapped the roof in Satin Black plus the 2 sections you see on the front bumper.
Also wrapped the horrible chrome trim in Gloss black and finished off with a quick tint on the side markers/turning signals

[kaputt]

Fresh wash

[1and1]

Always love the Space Gray

[gotcha43]

Short drive

[christofis135i]

Corona drive

[elitesales305]

😬

[bobowar135]

Originally Posted by Suprgnat

Hanging out in the garage.

Can you get that bonnet any shinier?

[bobowar135]

Originally Posted by Boosted135i

Wrapped the roof in Satin Black plus the 2 sections you see on the front bumper.
Also wrapped the horrible chrome trim in Gloss black and finished off with a quick tint on the side markers/turning signals

Once again, I love that colour.

[yokomo963]

2008 135i - sparkling graphite metallic
Took the track car out today on double duty for a quarantine grocery trip haha.

[wantmymoneyincash]

Originally Posted by Gambeez

2013 M-Sport 128i.

Finally getting around to doing modifications after many things breaking at once. VC+gasket replaced, all new brakes, radiator replaced + hoses, plugs & coils replaced. It’s been an expensive year thankfully I was able to do all these myself. Recently installed some Depo V2s, 1M bumper, and lip. Waiting for rear 1M bumper to be painted and installing in a couple of days. Hopefully my black lines will show up sometime May and will be swapping out the halogen tail lights. From there I hope to get a custom quad exhaust and install headers + 3 stage intake. So long as nothing else breaks on er’ *knocks on wood*

Initially wasn’t happy with this style of 1M bumper (there are two version I found out after I got it painted). This one is more like the M3 instead of the 1M. But the eBay lip really tied it all together.

Sweet ride. How does that front lip fit? was thinking about this one, but yours looks way more aggressive. Wheel and tire specs?https://www.ebay.com/itm/16179387671...chn=ps&lpid=82

[triggergt]

[FredrikM]

My 125i.

[FredrikM]

Originally Posted by gotcha43

Short drive

I love the performance front, do you know anyone in Germany who sells them? They seem to be discontinued at BMW, so i'll guess i have to find a used one or a replica.

[Gambeez]

Originally Posted by wantmymoneyincash

Sweet ride. How does that front lip fit? was thinking about this one, but yours looks way more aggressive. Wheel and tire specs?https://www.ebay.com/itm/16179387671...chn=ps&lpid=82

Sorry for the late reply.

Lip is decent. It’s actually for the 1M and didn’t realize when I ordered it. But it was only 180 and poly. It also fit up minus the sides so I took a heat gun and remolded the fitment in those areas. Some spots it’s off but hardly noticeable unless you’re up close to it. I like it since the 1M rep I purchased didn’t sit as low as others do so it gave my car a more lowered look. Overall I’m pretty happy with the looks of it and how it changed the look of the front end.

Tires are Continental DWS Extreme Contact. 18s 215/40 fronts 235/45 rears on Motegi wheels, I believe MR147. I’m not 100% since they came with the car when I purchased it. I’ve meant to swap them for some VMRs but waiting to have to replace the tires since the wheels and tires were brand new when I bought it. Probably will do that at the end of the year since the tires will be heading out by then.

[wantmymoneyincash]

Originally Posted by Gambeez

Sorry for the late reply.

Lip is decent. It’s actually for the 1M and didn’t realize when I ordered it. But it was only 180 and poly. It also fit up minus the sides so I took a heat gun and remolded the fitment in those areas. Some spots it’s off but hardly noticeable unless you’re up close to it. I like it since the 1M rep I purchased didn’t sit as low as others do so it gave my car a more lowered look. Overall I’m pretty happy with the looks of it and how it changed the look of the front end.

Tires are Continental DWS Extreme Contact. 18s 215/40 fronts 235/45 rears on Motegi wheels, I believe MR147. I’m not 100% since they came with the car when I purchased it. I’ve meant to swap them for some VMRs but waiting to have to replace the tires since the wheels and tires were brand new when I bought it. Probably will do that at the end of the year since the tires will be heading out by then.

Nice, I purchased the same bumper you have because I hated the 1m rep that sat too low. I felt like it through the whole proportions off imo did not like the look. But that lip looks so sick, might go after one of them.

Looking for new rims and tires too. Looking at ec7s possibly. I want some concave but its hard to find lol

[Gambeez]

Originally Posted by wantmymoneyincash

Nice, I purchased the same bumper you have because I hated the 1m rep that sat too low. I felt like it through the whole proportions off imo did not like the look. But that lip looks so sick, might go after one of them.

Looking for new rims and tires too. Looking at ec7s possibly. I want some concave but its hard to find lol

I recommend the lip highly. Cheap and don't have to worry about it breaking since it's PPU. Like I said, just have a heat gun and remold the sides where it flares out to the bumper and your solid.

Unfortunately I need to pick up a new one, I'm in no rush. But I some how forgot to install screws in the middle to support it. Just the other day on the highway it got loose and started dragging. It maintained it's shape but the paint scrapped off and has some rash on one side of it. Thankfully I didn't professionally paint it since I was aware something like this could happen and didn't want to drop 150-250 on a professional paint on a lip. But still looks decent, in no rush since I'm more worried about getting my quad tip exhaust finished (hopefully next week) and getting my 3 stage intake and tune completed.



Those would look nice! Concave or flat, that style of wheel looks great on our cars. I cannot wait to pick up a new set even though the Motegi's on it are decent. The girl loves them at least but they've gotten some curb rash from me not paying attention while parallel parking it.

[wantmymoneyincash]

Originally Posted by Gambeez

I recommend the lip highly. Cheap and don't have to worry about it breaking since it's PPU. Like I said, just have a heat gun and remold the sides where it flares out to the bumper and your solid.

Unfortunately I need to pick up a new one, I'm in no rush. But I some how forgot to install screws in the middle to support it. Just the other day on the highway it got loose and started dragging. It maintained it's shape but the paint scrapped off and has some rash on one side of it. Thankfully I didn't professionally paint it since I was aware something like this could happen and didn't want to drop 150-250 on a professional paint on a lip. But still looks decent, in no rush since I'm more worried about getting my quad tip exhaust finished (hopefully next week) and getting my 3 stage intake and tune completed.



Those would look nice! Concave or flat, that style of wheel looks great on our cars. I cannot wait to pick up a new set even though the Motegi's on it are decent. The girl loves them at least but they've gotten some curb rash from me not paying attention while parallel parking it.

Was just thinking the fitment of the lip might be off because the 1M bumper is wider than the 1M rep for the 135. Maybe there is one I can find that is for the 1M rep. Or jus do what you did lol.

Quad tip is going to look awesome man, I got the Remus quad and I love the look.

Never thought the fitment of wheels and tires on this car would drive me up a wall lol. I think im looking at 18x8.5 +35 and 18x9.5 +45 . 235/40 255/35

[iminhell1]

circa 2018

[iminhell1]

2018

[///M FORCE ONE]

Originally Posted by christofis135i

Corona drive

What wheels and specs are you running? Beautiful car to say the least