|
|
|
01-27-2016, 02:29 AM | #89 |
Enlisted Member
7
Rep 40
Posts |
My battery is a bit iffy, it shuts down the radio after about 3 mins after stopping engine with a yellow battery light on the dash. I'm going for the charger option personally haha
This has been a good thread and I've appreciated opinions and thoughts from all angles. |
Appreciate
0
|
02-01-2016, 04:14 AM | #90 | |
First Lieutenant
72
Rep 382
Posts |
Sorry to revive an old thread but out of curiosity what year is your 1er? I have a April build 09 and the cable you linked says it only works up too 2008 bmws. Wondering if you have an 08 or 09+. Not trying to spent $100 on a BMW INPA / Ediabas K+DCAN when a lot of people are using the cable you linked below for less than $25 shipped . Please let me know if you think it'll work for my car .
Quote:
|
|
Appreciate
0
|
02-01-2016, 03:41 PM | #93 |
Banned
389
Rep 2,186
Posts |
There is a fix for people with the white boards to get your cable working I haven't tested it myself but other people say it works
I have the files to do it just haven't got a non working cable to try and see if the fix works if someone in Sydney has one that doesn't work I would love to borrow it and see if I can fix them and do a full write up Any volunteers are willing to give me a non working cable ? Last edited by martymil; 02-02-2016 at 06:28 AM.. |
Appreciate
0
|
02-01-2016, 11:07 PM | #94 | |
First Lieutenant
72
Rep 382
Posts |
Quote:
Last edited by pepper135I; 02-01-2016 at 11:14 PM.. |
|
Appreciate
0
|
02-01-2016, 11:14 PM | #96 |
First Lieutenant
72
Rep 382
Posts |
Did you have too install any drivers? I see your link comes with a CD but I am going to use this on an andriod tablet(no cd drive) ? If mines a white board I'll just send you it and try buying a new one. Should be here next week and I'll know status of it working .
|
Appreciate
0
|
02-02-2016, 01:35 AM | #97 |
Banned
389
Rep 2,186
Posts |
on an android tablet from the link provided you don't have to install any drivers, its
all plug and play Everything works straight out of the box The only software you have to download is the MHD software and pay for the licence to use it. |
Appreciate
0
|
02-06-2016, 02:21 PM | #100 | |
Registered
0
Rep 2
Posts |
Quote:
Could you send me files and instruction in pm?! I promise I would share test results asap!!! |
|
Appreciate
0
|
02-06-2016, 04:53 PM | #101 |
Banned
389
Rep 2,186
Posts |
Here you go, these are untested by me.
I hold no responsibility if something goes wrong. Use at your own risk I cant give instructions how to do it as I haven't done one yet The are some jpg's in the download that show you how to do it. http://osefactory.com/tools/k+dcan/dcan_Tools.rar . Last edited by martymil; 02-06-2016 at 10:38 PM.. |
Appreciate
0
|
02-07-2016, 04:03 AM | #102 | |
Registered
0
Rep 2
Posts |
Quote:
Chineese guys often flash it with wrong parameters. (frequency and divider as I remember). In order to flash - you need programmer and some knowlwdge - basically google helps.. Actually, it's easier to buy new one (if U hv not done it before).. Basically, it COULD BE possible to flash right paramenters without programmer - so special utility from manufacture needed . The problem is that in order to flash - you hv to set +5V at the PIN . This cable probably lacks this feature (erase and put flash in writeable state). Thank you anyway. |
|
Appreciate
0
|
02-15-2016, 11:07 PM | #103 |
First Lieutenant
72
Rep 382
Posts |
Arrived from LA last week. Just opened up the package. Clear obd2 with green motherboard behind the clear plastic, looks like I lucked out !
|
Appreciate
0
|
02-17-2016, 02:58 AM | #105 |
Enlisted Member
7
Rep 40
Posts |
I still have dramas with mine. Even with charger connected the OBD port shuts down about 2-3mins into a read. The light goes off the cable and the app just sits there. Tried on 2 android devices same issue. Green board cable from the first post and the otg cable from the first link as well
I can't win with this |
Appreciate
0
|
02-17-2016, 06:00 AM | #107 |
Lieutenant
15
Rep 457
Posts |
Thanks Marty for compiling the "parts list" to use with MHD. Got the Lenovo tablet today and was just about to pay for the cables and cover on eBay when I decided to check the thread again.
Spectral can you let us know what device(s) you are using that didn't work with the dcan cable.
__________________
2008 E92 335i M-Sport | Sapphire Black | Sunroof | Creme Beige | Poplar Grey | Logic 7 | 6AT | 19" AG M359's | Michelin PS4S | LUX V3 | MHD V5 E40 | Steve AZ Walbro inline | Vishnu DCI | BMS CP | AR Design Catless DP's | Forge DV's | Helix IC | (Stock Cat. back) |
|
Appreciate
0
|
02-17-2016, 09:07 PM | #108 | |
Banned
389
Rep 2,186
Posts |
Quote:
Make sure you turn everything off Lights, stereo is on mute, navigation is turned off. Make sure your battery is fully charged. Turn your charger off and wait 30 sec, then turn back on again Try to do a read when the charger is on bulk charge. I ordered 3 of those cables and they all work on the Lenovo tablet JD75 is using one on his Samsung phone On the Lenovo tablet the read takes less than 10 seconds. There must be something wrong with the phones your using. Last edited by martymil; 02-17-2016 at 09:14 PM.. |
|
Appreciate
0
|
02-17-2016, 09:15 PM | #109 | |
Banned
389
Rep 2,186
Posts |
Quote:
|
|
Appreciate
0
|
02-18-2016, 10:43 PM | #110 | ||
Lieutenant
15
Rep 457
Posts |
Quote:
__________________
2008 E92 335i M-Sport | Sapphire Black | Sunroof | Creme Beige | Poplar Grey | Logic 7 | 6AT | 19" AG M359's | Michelin PS4S | LUX V3 | MHD V5 E40 | Steve AZ Walbro inline | Vishnu DCI | BMS CP | AR Design Catless DP's | Forge DV's | Helix IC | (Stock Cat. back) |
|
||
Appreciate
0
|
Post Reply |
Bookmarks |
|
|