|
|
|
08-09-2015, 10:34 AM | #1 |
Banned
25
Rep 241
Posts
Drives: 08 328i, 10 z4 35i
Join Date: Jun 2015
Location: crystal city
|
Injectors Coding
So, I'll probably be replacing some of my injectors soon and I read it will require coding.. Found a good youtube guide and a few posts on using INPA, but I must be overlooking where to get the actual values to put in? Is it calculated or the same? I was thinking about reading my current values and using those, but if my injectors are bad, is this a bad idea as well or are the readings what they "should be", just the injectors aren't performing that level which is why I go into limp mode?
Any help on the values to use when coding would be greatly appreciated! 08 128i N51 |
08-09-2015, 01:42 PM | #3 |
Private First Class
3
Rep 141
Posts |
^ he's right... If you watch those videos they tell you exactly every step. Watch the whole video do thorough research everything's here for you. I just did all of my injectors. Used what i learned online and my car runs better than when i bought it...
Google n54 injector coding |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|