|
|
|
08-21-2023, 10:11 AM | #1 |
Private First Class
86
Rep 171
Posts
Drives: A4 1.8TQM, 135is DCT
Join Date: Jan 2023
Location: Milwaukee
|
Performance Aero Bumper with PDC retrofit
I am going to be retrofitting front PDC to my performance aero bumper. Thanks to Realoem.com, I am well studied on the bits I'll need (willing to share any info!) EXCEPT one!
The mounting holes on the bumper. All suggestions I have so far are flat mounts (51117209152 & 51117841902). However, if you Google this bumper with pdc, you will see the sensors are not mounted flush, they are angled and recessed. Please see below I believe that if I mount the sensors flush, they will not be correct. I'd like to know what the part numbers are for the mounts. I'm almost certain they are not molded into the bumper! My bumper has X's to mark where the holes for PDC should be. Would appreciate any help!
__________________
2013 BMW 135is Coupe | Dinan Stage 3 | M3 Subframe Bushings | Dinan Monoball Joints | Dinan Toe Links | 1M Strut Bar | MPSS - BMW 313M's 18x7.5 / 18x8.5 | Min Grey, Savanna | Prem, Tech | DCT | #341/586
|
08-23-2023, 11:14 AM | #2 | |
New Member
11
Rep 19
Posts |
Quote:
|
|
Appreciate
0
|
08-23-2023, 11:21 AM | #3 |
Private First Class
86
Rep 171
Posts
Drives: A4 1.8TQM, 135is DCT
Join Date: Jan 2023
Location: Milwaukee
|
Someone suggested that the correct mounts end in 902, 15 minutes ago. There are no images of the front of them available so it is possible.
And there is the headlight washer covers that are NLA…
__________________
2013 BMW 135is Coupe | Dinan Stage 3 | M3 Subframe Bushings | Dinan Monoball Joints | Dinan Toe Links | 1M Strut Bar | MPSS - BMW 313M's 18x7.5 / 18x8.5 | Min Grey, Savanna | Prem, Tech | DCT | #341/586
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|