F/S: setrab/mocal oil cooler 25row

[Dat1seriesdoe]

BIMMERPOST / Classifieds

Asking Price:

USD 150.00

Shipping Costs Included

Location:

✓ Will Ship

Item Interest

Mocal 25 Row, 235 Matrix Oil Cooler

Overall Dimensions: 13" Wide x 2" Core Thickness x 7-3/4" Height
Dry Weight: 3.6 lbs (1.60kg)
Fluid Capacity: 0.55 QT (0.50L)

Cooler construction utilizes a variable number of pressed plates forming oilways. These oilways contain "turbulators" to break down boundary layer effects in the oil flow, allowing for maximum heat dissipation without undue pressure build up. Oilways are interspaced with corrugations providing airways between the plates, and are also louvered to optimize heat transfer. The entire oil cooler is made from aluminum alloy braised into a one-piece unit. Each cooler is then tested by immersion to a pressure of 170 psi. Random coolers are put through even more exhaustive testing to ensure stability under all conditions.

(ABOVE DIRECT FROM MOCALS SITE)

this was used briefly on a subaru build i had about a year ago, ended up parting out the car and had this left over.. should be a perfect snug fit for the 135/335 people looking to upgrade from their stock cooler but retain stock location in the front bumper.. ive also seen these mounted behind the kidney grilles.. i have a bracket (not pictured) for the other side of the cooler similar to the one that is pictured and still attached to come with it. i will ship anywhere in the US.

$150.00 PayPal only.

four43-5one9-71twotwo if you'd like to get ahold of me quicker than direct message.

[Dat1seriesdoe]

Sold. Thanks all!