|
|
|
08-31-2018, 12:24 AM | #1 |
Banned
170
Rep 615
Posts |
Hey guys, thought about doing rods and pistons in my n54 and then realized that if i was going to do it might as well do it right or not at all. So, im selling these JE pistons that are 84.5mm bore and have a 9.5:1 compression ratio. Comes with the following items: 6 JE pistons Upgraded rings for all pistons Wrist pins wrist pin c-clip Spec sheet stickers Price is 900 OBO shipped. Negotiable |
09-06-2018, 02:55 PM | #6 |
shmo
383
Rep 1,026
Posts |
hey rom.. you state if your gonna do it right … etc etc... wouldn't these be an upgrade to your "rod and pistons goal"
?? why get rid of em.. or are these stock specs and you wanna go over?? just trying to understand ur pov.
__________________
No sig
|
Appreciate
0
|
09-06-2018, 10:25 PM | #7 |
Punching monkeys and dropping donkeys
48
Rep 137
Posts |
I asked the same thing over on e90 and it was because he didn't want to deck the heads
|
Appreciate
1
elitesales305383.00 |
09-15-2018, 04:47 AM | #8 |
Banned
170
Rep 615
Posts |
to do it right, it would need to be close decked or sleeved and that right there is upwards of 2k. plus building the heads and everything else, it would come out to 5k and that in my opinion is too much. especially since fueling will be tought and expensive as well. got these for really cheap and looking to sell them. also bump ill sell em for 800 today shipped
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|