Need help with Crazy instrument cluster issue!

agarciaN52 · 02-11-2021, 02:40 AM

Quote:

Originally Posted by NorthernDancer

Quote:

Originally Posted by Havocsteve

Happened to me also during our 40+ heat wave we had here in Ontario Canada. It was the window washer fluid bottle that kinked and leaked into the trunk footwell. I had to take it out and use electrical cleaner and soak the board while scrubbing it, otherwise it would have costed me $500 CAD for a new PDC module.

What windshield washer line is located anywhere close to the trunk?

Dude that shit literally happened to me 😂 lol idk why I had it in my trunk

Bill H · 12-26-2022, 01:43 PM

Same for me. All warning lights on dash coming on for a few seconds then going off, speedo drops to zero etc etc same as described here.
Many thanks for the clear leads, boot (trunk) carpets wet on RH side of car as viewed from rear, pulled off the dozen or more plastic clips and removed most of boot liner on that side. This is a convertible so the roof pump is located here as well.
PDC module and roof pump under water, a good inch or two in this well, removed module and drained and dried also removed foam around pump and dried.
There doesnt appear to be a drain hole in this well, - why not BMW? - Theres 2 large plastic plugs in floor so drilled a hole in both so we dont get a swimming pool in there again.
All now working - thanks for these tips, really valuable.

12-26-2022, 01:43 PM	#24
Bill H New Member 0 Rep 12 Posts Drives: E93 330D Join Date: Jan 2016 Location: Winchester UK iTrader: (0)	Same for me. All warning lights on dash coming on for a few seconds then going off, speedo drops to zero etc etc same as described here. Many thanks for the clear leads, boot (trunk) carpets wet on RH side of car as viewed from rear, pulled off the dozen or more plastic clips and removed most of boot liner on that side. This is a convertible so the roof pump is located here as well. PDC module and roof pump under water, a good inch or two in this well, removed module and drained and dried also removed foam around pump and dried. There doesnt appear to be a drain hole in this well, - why not BMW? - Theres 2 large plastic plugs in floor so drilled a hole in both so we dont get a swimming pool in there again. All now working - thanks for these tips, really valuable.
	Appreciate 0 Quote