BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 

Post Reply
 
Thread Tools Search this Thread
      06-04-2018, 07:41 AM   #1
simyo
New Member
8
Rep
13
Posts

Drives: E87 120D
Join Date: Oct 2017
Location: Netherlands

iTrader: (0)

335i intercooler on pre facelift 120D

Hi guys !

I tried to find a topic with the search button but could not find any information regarding that a 335D or 335i would fit pre facelift 120D.
The diameter of the IC hose connections are 70mm, my hoses are 51mm, so that won't fit.
I came up with an idea to use bayonet hose couplers.

https://www.forgemotorsport.co.uk/Alloy ... --600.html

Type F is a coupler (68.3mm towards 54 mm) which fits the IC and my hose when I cut the connections off and clamp it.

Yesterday I tried to fit the 335i IC from underneath but unfortunately one side got blocked by the front axle..

One other guy here on the forum Romak, did even put a larger IC in his car.
So it can fit !

My idea was to take off the front bumper and air duct (dont know how to remove the air duct btw), trim some plastic away like Romak did and slide IC on to its place.

Did anyone tried this? To slide the IC through the air duct hole?



Greetings from Holland!
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 03:38 AM.




1addicts
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST