|
|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
06-24-2018, 04:32 PM | #1 |
Private
5
Rep 68
Posts |
Alignment (best of both) after camber plates and M3 arms F/R
Just finished a TON of work on my 135i over the last month including some suspension items. Looking for thoughts on alignment specs to take advantage of the following that I have installed along with the bilstein b8 and H&R springs that are in there.
-m3 front arms -Dinan Camber plates -m3 rear arms -m3 FSB (Pins of course are pulled) Put in the Powerflex black series rear subframe inserts as well until I swap an LSD in and m3 bushings Alignment for best handling on road taking advantage of these bits I have as follows: Camber Front: -2.0 Toe Front: -.40 or -9/64” Camber Rear: -1.9 Toe Rear: +.32 or +1/8” Thoughts or suggestions? I do spirited driving on a pretty regular basis and hope to track the car a few times a year. Alignment is Tuesday! Open to thoughts and suggestions! Joe |
Post Reply |
Bookmarks |
|
|