|
|
|
03-09-2018, 04:11 PM | #1 |
Lieutenant
245
Rep 439
Posts |
OMGSplitters Front Lip
As you can tell by the title this is featuring the lip from OMGSplitters also known as fmxomar on the forums here.
This is not a DIY but if you do buy this lip i do highly recommend going with support rods (made that mistake once and broke a lip ) and using larger washers when installing all of the hardware. For reference I went with the APR 8mm support rods (mostly because they were on sale) but I would recommend going with the 10mm as the 8mm were too short for how i wanted to mount it (8mm is still shown in the pictures). Overall I am very happy with the quality of the lip, the fitment is good and is adjustable to how ever you want to mount it (no pre-drilled holes). Installation took me maybe around 2 hours with the bumper off the car, trying to be very precise, and figure out how to drill all of the holes. The included hardware was a very nice touch to have as well. The lip fits all of the 1-series bumpers, below I have it shown of the Aerodynamic performance bumper, and as a result of this combination I am not currently running my skid plate as i deemed it much easier that way. And now the pretty pictures:
__________________
2008 SGM 128i - 3 Stage IM - 130i Tune - Dinan Camber Plates - BMW PE - Injen Intake - 1M Mirrors - LCI Blacklines - M4 Spoiler - Blacked 263's - Aero Bumper - Aero Side Skirts - OMGSplitter - AFE Intake Scoops
|
Post Reply |
Bookmarks |
Tags |
apr, front lip, omgsplitters |
|
|