Vossen CVT potential rub?

[bmwonbrembos]

I have a set of CVT's on my 128i

Fronts 19x8.5 et40 225/35/19
Rear 19x10 et55 255/30/19

Car does not rub currently, but I will be dropping it on Vogtland springs. Question is could I fit a 265/30/19 in the rear, or a 255/35/19 without rubbing? I figured a 275/30/19 might be too extreme.

[Tuxedo]

as long as the rebound is minimal rubs will be rare on 35f/30r

I'd only suggest 40f/35r aspect ratio if you commute on 19" for some extra pothole forgiveness might not worry of such in FL.

tho it's been a while I know I read a thread of 285/30 pushing and some mfg's tires rub and some didn't. if memory serves rear was on et52 3mm spacer... drank and slept since

[bmwonbrembos]

Originally Posted by Tuxedo

as long as the rebound is minimal rubs will be rare on 35f/30r

I'd only suggest 40f/35r aspect ratio if you commute on 19" for some extra pothole forgiveness might not worry of such in FL.

tho it's been a while I know I read a thread of 285/30 pushing and some mfg's tires rub and some didn't. if memory serves rear was on et52 3mm spacer... drank and slept since

Originally Posted by Tuxedo

as long as the rebound is minimal rubs will be rare on 35f/30r

I'd only suggest 40f/35r aspect ratio if you commute on 19" for some extra pothole forgiveness might not worry of such in FL.

tho it's been a while I know I read a thread of 285/30 pushing and some mfg's tires rub and some didn't. if memory serves rear was on et52 3mm spacer... drank and slept since

So 275/30/19 with fenders rolled shouldn't rub?

[bmwonbrembos]

Bump

[smrtypants44]

Id be more worried about rubbing in the front. On vogtland springs my front wheels tucked.