Full custom headlights modification

[HaroonBalushi]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

Check this post for more pictures and stuff.
http://www.1addicts.com/s/showthread.php?t=1478407

Since I got lots of messages asking about these headlights, I thought I would do a separate thread regarding all the prices and styles I'd do!

As we all know our cars have 3 different headlights types, Halogen, non LCI, and LCI. Unfortunately, I won't be able to do halogens.

Now for the styles I'd be able to do in both LCI and non LCI.

1. DTM style rings (the ones i did for my car)

These headlights include a dtm style (flat bottom) angel eyes rings and a switchback LED eyebrows from bavgruppe.





Price is $500+shipping. This price includes Angel eyes, LED eyebrow and full blackout.

2. Widebody DTM style rings

The difference with these is that they have a wider acrylic and they're from bavgruppe and will include switchback led eyebrow.





Price is $650+shipping. Again this price includes angel eyes rings, LED eyebrow and a full blackout.

3. 3/4 DTM style rings

These type of rings offer a 3/4 style rings and they're from bavgruppe.



price is $665+shipping. Includes angel eyes rings, LED eyebrow and a full blackout.

4. Vision system rings (M4 style)





Price is $950+shipping. Includes angel eyes rings, LED eyebrow and a full blackout.


Now for the time that it takes for them to be done:

Usually it'll take me 2-3 days maximum from delivery to get them done but if something comes up it might take a bit longer. So I'd say they'd take 7-10 days with shipping back and forth.

For the non LCI headlights, I'd be able to provide LCI housings depending on the prices of the used headlights I find. Usually not more than $300 bucks (I got mine for $200) so if you're non LCI consider $200-$300 extra on the prices above.

Did my headlights throw any codes? no, there wasn't anything on the dashboard after installation.

For the switchback LED eyebrows you'll have to only connect one wire which takes literally 5 minutes. Will explain more for anyone who orders.

I'm not sure if I left out any information but if you guys have any questions feel free to ask!

I don't own any pictures from styles 2,3,4.

[Yeineken]

Awesome! Now I just need to find time to pull my headlights out to send to you.

[lopez45]

Apologize for my ignorance but do you just ship the angel eyes? Or does this include installation from us shipping you the headlights? Thanks

[Cavpilot2k]

Do the orange corners get masked, smoked, or replaced with clear or other corners?
In Some of those pictures you can see parts of the orange still showing and in others not.
I hate the orange corners. They kill the whole look of the car.

[hungry r]

Do you use the heatgun and pry method or the heat knife method?
any pictures of the reseal area after completion?

[elitesales305]

wow these looks nice..

[HaroonBalushi]

Originally Posted by Yeineken

Awesome! Now I just need to find time to pull my headlights out to send to you.

Anytime you're ready just let me know man!

[HaroonBalushi]

Originally Posted by lopez45

Apologize for my ignorance but do you just ship the angel eyes? Or does this include installation from us shipping you the headlights? Thanks

This includes everything. You'll ship the headlights and I will do everything from angel eyes to blackout.

[HaroonBalushi]

Originally Posted by Cavpilot2k

Do the orange corners get masked, smoked, or replaced with clear or other corners?
In Some of those pictures you can see parts of the orange still showing and in others not.
I hate the orange corners. They kill the whole look of the car.

Actually what you see is the amber bulb which is in our car is always on unless you code it out. I didn't have the time to code it out. It's called corner delete i believe.

And I actually paint over them with whatever paint you'd like.

[HaroonBalushi]

Originally Posted by hungry r

Do you use the heatgun and pry method or the heat knife method?
any pictures of the reseal area after completion?

Originally Posted by hungry r

Do you use the heatgun and pry method or the heat knife method?
any pictures of the reseal area after completion?

Never tried the heat knife method and I never will, I just believe it's hard to reseal it back afterwards.

Here's a picture of the resealed area.

[Mr. Pharaoh]

Two questions for you.

1. Would you be able to do regular round rings without the flat bottom?
2. If not, how much would you charge for just blackout?

[HaroonBalushi]

Originally Posted by Mr. Pharaoh

Two questions for you.

1. Would you be able to do regular round rings without the flat bottom?
2. If not, how much would you charge for just blackout?

I can do round angel eyes too. Send me a pm.

[Gangplank]

I have a 2011 but with what I believe are non-LCI headlights (pic attached).

So will I need a set of LCI used to do the conversion to what you show in your pics?

So $500 + $200-$300 depending on what you find for lights? And could you locate some, do the work and ship to me? Or do I still need to remove mine & ship to you and you ship the finished ones back? FWIW I have the self leveling adaptive lights.

522 XENON LIGHT
524 ADAPTIVE HEADLIGHTS

[tphaeng]

do you provide any kind of warranty if the lights give out within a certain time period or there's condensation inside headlight?

[HaroonBalushi]

Originally Posted by Gangplank

I have a 2011 but with what I believe are non-LCI headlights (pic attached).

So will I need a set of LCI used to do the conversion to what you show in your pics?

So $500 + $200-$300 depending on what you find for lights? And could you locate some, do the work and ship to me? Or do I still need to remove mine & ship to you and you ship the finished ones back? FWIW I have the self leveling adaptive lights.

522 XENON LIGHT
524 ADAPTIVE HEADLIGHTS

A pm has been sent answering all that!

[HaroonBalushi]

Originally Posted by tphaeng

do you provide any kind of warranty if the lights give out within a certain time period or there's condensation inside headlight?

Yes I do, and that I forgot to mention lol. 6 months, if you encounter any problems regarding my work done on the headlights the fix is free of charge.

[ShocknAwe]

Interested if you offer a core return option. I'd like to have preLCI with proper color changing round LED rings, LCI corners (if possible to swap in), and blackout. Not a fan of the LCI eyebrow.

Given this is my DD I'd prefer to ship my cores to you after.

[tphaeng]

pm sent

[HaroonBalushi]

Originally Posted by ShocknAwe

Interested if you offer a core return option. I'd like to have preLCI with proper color changing round LED rings, LCI corners (if possible to swap in), and blackout. Not a fan of the LCI eyebrow.

Given this is my DD I'd prefer to ship my cores to you after.

Unfortunately, I dont, at least not for the moment. Maybe in the near future I'd do such thing because it'll be easier for the buyer, but for the time being I dont.

[ShocknAwe]

Originally Posted by HaroonBalushi

Unfortunately, I dont, at least not for the moment. Maybe in the near future I'd do such thing because it'll be easier for the buyer, but for the time being I dont.

Thanks for the reply. Keep me in mind as you get into this and decide to offer a core service!

[Cavpilot2k]

What controls the colors on the Style 3?
Is that user programmable or set at installation and fixed?

[HaroonBalushi]

Originally Posted by Cavpilot2k

What controls the colors on the Style 3?
Is that user programmable or set at installation and fixed?

It is controlled via a phone app.