>>> HP Autowerks <<< aFe Stage 2 N54 Intake

HP Autosport · 03-01-2011, 01:21 AM

Producing 14 max horsepower and 27 lbs. x ft. torque, this radically different Stage 2 sealed cold air intake system is engineered to let maximum air in while keeping engine heat out.this intake system smoothly directs increased air flow for improved volumetric efficiency and maximum performance. So effective is the design that Intake Air Temperature (IAT) at normal running speeds with this aFe intake system is 11 degrees lower than the factory intake. Easily accessible with a satin black powdercoated aluminum cover, an washable/reusable conical air filter is enclosed in a molded plastic housing and mounted on a oval intake tube that smoothly supplies maximum air to the twin turbos. The full effect of this system cannot be felt or tested on stationary dyno and can only be fully appreciated on the wide open highway.

Order here:

https://www.hpashop.com/products/afe...cf393755&_ss=r

BMW86 · 03-01-2011, 01:33 AM

Do you have anymore photos of the intake installed?

You also clearly state that - "The full effect of this system cannot be felt or tested on stationary dyno and can only be fully appreciated on the wide open highway."

However, you have advertised that this intake gives you + 14hp and + 27tq with small picture of a dyno graph.

HP Autosport · 03-03-2011, 11:16 AM

We currently don't have more pictures but...

We've decided to sweeten the pot even more!

If you place your order with us, we will not only provide you with the discount on the aFe stg 2 intake with FREE SHIPPING, but we will also offer you one of the following:

2 FREE Bottles of Motul 600 Brake Fluid
10% off of Macht Schnell DP
20% off of Macht Schnell Air Scoops
20% off of HP Autowerks Adjustable Endlinks

BMW86 · 03-03-2011, 04:09 PM

I would really like to see pictures of how this intake implements the factory plenum.

M_BYEEE · 03-10-2011, 10:41 AM

I'm going to be down in SB today and I was gonna check out HP. maybe they can test install it on mine

M_BYEEE · 03-10-2011, 10:51 AM

Oh just kidding they don't even have it in stock with no eta on arrival

HP Autosport · 03-10-2011, 12:14 PM

Quote:

Originally Posted by amg135i

Oh just kidding they don't even have it in stock with no eta on arrival

We may have a used one!

JHOOPS2 · 03-10-2011, 06:35 PM

I have my own Dynojet 224xlc if you need an independent test done ....

Si-M240i · 03-22-2011, 09:09 AM

How much wil this be incl shipping to the UK ?

HP Autosport · 04-23-2011, 12:48 AM

Quote:

Originally Posted by Si-135i

How much wil this be incl shipping to the UK ?

Replied via PM.

uberschnell · 04-28-2011, 08:59 PM

Installed mine a few days ago - excuse the bad pics.

Absolutely love this intake. I've run Drop in, scoops, DCI, mr.5 intake. This intake has been the best performing of all of them.

Very quiet, nice bump in torque off the line. Engine definitely spools faster and no traffic heat soak like the DCI.

HP Autosport · 05-01-2011, 03:11 PM

Quote:

Originally Posted by MteK

Installed mine a few days ago - excuse the bad pics.

Absolutely love this intake. I've run Drop in, scoops, DCI, mr.5 intake. This intake has been the best performing of all of them.

Very quiet, nice bump in torque off the line. Engine definitely spools faster and no traffic heat soak like the DCI.

Looks good!

HP Autosport · 05-12-2011, 08:33 PM

All intakes good in stock. Take advantage of these bundled deals or free parts!

2 FREE Bottles of Motul 600 Brake Fluid
10% off of Macht Schnell DP
20% off of Macht Schnell Air Scoops
20% off of HP Autowerks Adjustable Anti Roll Bar Endlinks

>>>>>>>>> Order Here: http://www.hpashop.com/product.sc?pr...categoryId=110

1&done · 05-15-2011, 10:13 PM

Quote:

Originally Posted by HP Autowerks

All intakes good in stock. Take advantage of these bundled deals or free parts!

2 FREE Bottles of Motul 600 Brake Fluid
10% off of Macht Schnell DP
20% off of Macht Schnell Air Scoops
20% off of HP Autowerks Adjustable Anti Roll Bar Endlinks

>>>>>>>>> Order Here: http://www.hpashop.com/product.sc?pr...categoryId=110

package price w/ some SS brakelines and I'll have to buy this intake

kik24 · 05-17-2011, 12:04 PM

Any pics on a 128i?

HP Autosport · 05-17-2011, 01:28 PM

Quote:

Originally Posted by 1&done

package price w/ some SS brakelines and I'll have to buy this intake

10% off of Stoptech SS line kit added!

Si-M240i · 05-27-2011, 02:01 AM

It's much bigger than the "sales pictures" appear, which it a good thing as I was wondering if the surface area of the filter was going to be as much as a stock "drop in" one. I recon it is at least equal and probably larger, so I am warming still further to getting one on these, just need to get the shipping cost down to the UK as I will have "import tax" to pay too...... My only concern with this filter is how dirty the filter will get near the plenum intake and how fast it get dirty. When I had the Riss Racing intake it was really dirty in just a few weeks and had to rotate it and then clean after about 3 months.......that was in an "open" engine bay though, so I guess this design will certainly be better. Will it still fit with Forge DDV's in a stock Charge pipe ?

AWD2RWD · 06-06-2011, 02:24 AM

Do we have any more reviews by members besides the one in this post?

sear · 06-06-2011, 07:33 PM

Quote:

Originally Posted by naorgil

Do we have any more reviews by members besides the one in this post?

x2

evilstib · 06-12-2011, 11:15 AM

Anyone actually Dyno one of these yet? I don't believe the claims of 14HP & 27 tq.

If it was true, I'd buy one right away!!!

Someone PLZ dyno this!

C4747Z · 06-12-2011, 11:45 AM

How does this intake compare to the DCI aFe intake?

HP Autosport · 06-16-2011, 10:56 PM

Quote:

Originally Posted by C4747Z

How does this intake compare to the DCI aFe intake?

Sealed against engine heat.

03-01-2011, 01:21 AM	#1
HP Autosport Supreme Allied Commander 4046 Rep 55,560 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	>>> HP Autosport <<< aFe Stage 2 N54 Intake Producing 14 max horsepower and 27 lbs. x ft. torque, this radically different Stage 2 sealed cold air intake system is engineered to let maximum air in while keeping engine heat out.this intake system smoothly directs increased air flow for improved volumetric efficiency and maximum performance. So effective is the design that Intake Air Temperature (IAT) at normal running speeds with this aFe intake system is 11 degrees lower than the factory intake. Easily accessible with a satin black powdercoated aluminum cover, an washable/reusable conical air filter is enclosed in a molded plastic housing and mounted on a oval intake tube that smoothly supplies maximum air to the twin turbos. The full effect of this system cannot be felt or tested on stationary dyno and can only be fully appreciated on the wide open highway. Order here: https://www.hpashop.com/products/afe...cf393755&_ss=r Attached Images Last edited by HP Autosport; 08-07-2023 at 06:57 PM..
	Appreciate 1 falconer3.00 Tweet Quote

03-01-2011, 01:33 AM	#2
BMW86 Major General 401 Rep 9,156 Posts Drives: RS3 Sedan / Macan S Join Date: Jul 2008 Location: Australia iTrader: (0)	Do you have anymore photos of the intake installed? You also clearly state that - "The full effect of this system cannot be felt or tested on stationary dyno and can only be fully appreciated on the wide open highway." However, you have advertised that this intake gives you + 14hp and + 27tq with small picture of a dyno graph.
	Appreciate 0 Quote

03-03-2011, 11:16 AM	#3
HP Autosport Supreme Allied Commander 4046 Rep 55,560 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	We currently don't have more pictures but... We've decided to sweeten the pot even more! If you place your order with us, we will not only provide you with the discount on the aFe stg 2 intake with FREE SHIPPING, but we will also offer you one of the following: 2 FREE Bottles of Motul 600 Brake Fluid 10% off of Macht Schnell DP 20% off of Macht Schnell Air Scoops 20% off of HP Autowerks Adjustable Endlinks Last edited by HP Autosport; 03-03-2011 at 01:51 PM..
	Appreciate 0 Quote

03-03-2011, 04:09 PM	#4
BMW86 Major General 401 Rep 9,156 Posts Drives: RS3 Sedan / Macan S Join Date: Jul 2008 Location: Australia iTrader: (0)	I would really like to see pictures of how this intake implements the factory plenum.
	Appreciate 0 Quote

03-10-2011, 10:41 AM	#5
M_BYEEE Brigadier General 151 Rep 3,269 Posts Drives: BSM X5M Join Date: Oct 2009 Location: Camarillo, CA iTrader: (7)	I'm going to be down in SB today and I was gonna check out HP. maybe they can test install it on mine __________________
	Appreciate 0 Quote

03-10-2011, 10:51 AM	#6
M_BYEEE Brigadier General 151 Rep 3,269 Posts Drives: BSM X5M Join Date: Oct 2009 Location: Camarillo, CA iTrader: (7)	Oh just kidding they don't even have it in stock with no eta on arrival __________________
	Appreciate 0 Quote

03-10-2011, 06:35 PM	#8
JHOOPS2 AKA HISSMAN 34 Rep 888 Posts Drives: 2009 SG 135i Coupe' Join Date: Aug 2010 Location: USA iTrader: (5)	I have my own Dynojet 224xlc if you need an independent test done .... __________________ (FBO) Cobb Stage 2+, AR Downpipes, Injen DCI, AA (Sport) FMIC, ER Chargepipe/Synapse BOV, Carbon fiber bits and Breyton GTS-R Wheels.
	Appreciate 0 Quote

03-22-2011, 09:09 AM	#9
Si-M240i Major 144 Rep 1,450 Posts Drives: M240i LCI Join Date: Aug 2008 Location: England iTrader: (0)	How much wil this be incl shipping to the UK ? __________________ M240i LCI (Mineral Grey):- M2 Door Mirrors, M2 Black Kidney Grills, Lower grille inserts, MP Exhaust, Dinan Carbon Fibre CAI, hot climate intake elbow
	Appreciate 0 Quote

04-28-2011, 08:59 PM	#11
uberschnell Brigadier General 677 Rep 4,077 Posts Drives: Wide Body 1 Join Date: Mar 2007 Location: Bay Area iTrader: (48)	Excellent intake Installed mine a few days ago - excuse the bad pics. Absolutely love this intake. I've run Drop in, scoops, DCI, mr.5 intake. This intake has been the best performing of all of them. Very quiet, nice bump in torque off the line. Engine definitely spools faster and no traffic heat soak like the DCI. Attached Images
	Appreciate 0 Quote

05-12-2011, 08:33 PM	#13
HP Autosport Supreme Allied Commander 4046 Rep 55,560 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	All intakes good in stock. Take advantage of these bundled deals or free parts! 2 FREE Bottles of Motul 600 Brake Fluid 10% off of Macht Schnell DP 20% off of Macht Schnell Air Scoops 20% off of HP Autowerks Adjustable Anti Roll Bar Endlinks >>>>>>>>> Order Here: http://www.hpashop.com/product.sc?pr...categoryId=110
	Appreciate 0 Quote

05-17-2011, 12:04 PM	#15
kik24 Enlisted Member 2 Rep 31 Posts Drives: 125 Join Date: May 2011 Location: SG iTrader: (0)	Any pics on a 128i?
	Appreciate 0 Quote

05-27-2011, 02:01 AM	#17
Si-M240i Major 144 Rep 1,450 Posts Drives: M240i LCI Join Date: Aug 2008 Location: England iTrader: (0)	It's much bigger than the "sales pictures" appear, which it a good thing as I was wondering if the surface area of the filter was going to be as much as a stock "drop in" one. I recon it is at least equal and probably larger, so I am warming still further to getting one on these, just need to get the shipping cost down to the UK as I will have "import tax" to pay too...... My only concern with this filter is how dirty the filter will get near the plenum intake and how fast it get dirty. When I had the Riss Racing intake it was really dirty in just a few weeks and had to rotate it and then clean after about 3 months.......that was in an "open" engine bay though, so I guess this design will certainly be better. Will it still fit with Forge DDV's in a stock Charge pipe ? __________________ M240i LCI (Mineral Grey):- M2 Door Mirrors, M2 Black Kidney Grills, Lower grille inserts, MP Exhaust, Dinan Carbon Fibre CAI, hot climate intake elbow
	Appreciate 0 Quote

06-06-2011, 02:24 AM	#18
AWD2RWD AWD to RWD 8 Rep 135 Posts Drives: Lancer Evolution 9 MR Join Date: May 2011 Location: California iTrader: (0)	Do we have any more reviews by members besides the one in this post?
	Appreciate 0 Quote

06-12-2011, 11:15 AM	#20
evilstib Bimmer Newbie 27 Rep 312 Posts Drives: CSM N54 Prem/Comf/Sound Join Date: Aug 2010 Location: Bear's Ass Canada! (Fort Mac) iTrader: (0)	Anyone actually Dyno one of these yet? I don't believe the claims of 14HP & 27 tq. If it was true, I'd buy one right away!!! Someone PLZ dyno this!
	Appreciate 0 Quote

06-12-2011, 11:45 AM	#21
C4747Z Second Lieutenant 12 Rep 221 Posts Drives: VO 1M & M5 Competition Join Date: Oct 2008 Location: Long Island, NY iTrader: (0)	How does this intake compare to the DCI aFe intake?
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search