01-03-2019, 09:33 PM | #1 |
Registered
2
Rep 4
Posts |
Auto Trans. Fluid Change Question
Hi All -
I'm getting ready to change the fluid on the GM 6-speed auto in my 2011 128i with about 65k miles. As far as I know, it's never been changed. I thought it would be a good idea to at least see the condition of the fluid before I drained it so I opened the fill port (17mm plug, above exhaust hangar as detailed in the DIY section here). I was more than a little surprised as the fluid gushed out - not the thin dribble (or nothing) that I expected. I quickly replaced the plug, having lost maybe 1/8 of a quart. The car is up on wheel ramps, and dead nuts level, as measured at the rocker. My concern is that I'll never be able to get that volume of fluid back into the transmission as seems to be there. Has anyone else experienced this? Is it a problem? Thanks, Dan p.s. The fluid is a little discolored, but smells good. |
01-04-2019, 01:24 PM | #2 | |
Lieutenant Colonel
248
Rep 1,585
Posts
Drives: 2011 VO 1M
Join Date: Sep 2010
Location: Jupiter, FL
iTrader: (28)
Garage List 2010 Porsche 911 GT3 [10.00]
2021 BMW X5 SD40i [0.00] 2023 Toyota TRD Pro [0.00] 2011 BMW 1M [9.83] 2014 Ford Raptor [0.00] 2005 Ariel Atom 2 [0.00] 2008 135i SOLD [10.00] |
Quote:
__________________
///1M #643 of #740
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|