|
|
|
04-17-2022, 12:42 PM | #1 |
Enlisted Member
9
Rep 37
Posts |
MHD/JB4 Tuner Needed
Hi Folks,
Just installed stage 2 VTT turbos, inlets, outlets, FMIC, pump... Looks like I need a custom tune to take advantage of all the hardware. Looking for a good local tuner in Toronto, or someone remote that can work as well. Looks like there are few different ways to go about it. If you have a recommendation, or would like to share your experience please drop here. (original thread here with more details https://www.1addicts.com/forums/show....php?t=1914058) Last edited by Alekseylis; 04-17-2022 at 03:37 PM.. |
04-18-2022, 06:04 AM | #2 |
Enlisted Member
9
Rep 37
Posts |
Thanks for the recommendation in PM. Speaking to trebila from n54tech.com, will post here once tune is done.
Last edited by Alekseylis; 04-18-2022 at 06:37 AM.. |
Appreciate
0
|
05-11-2022, 09:31 AM | #4 |
Enlisted Member
9
Rep 37
Posts |
Quick update here.
Got instructions on initial data logging from the tunner. Did a couple of runs, was getting "Boost Over Target" error. One thing I didn't realize going into this is that the stock Tmap sensor on n54 is inaccurate around 20 PSI... So ordered a new one 3.5Bar. Need to rewire a plug, but good otherwise. Will continue flashing once new boost sensor is installed. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|