|
|
|
11-20-2013, 09:57 PM | #1 |
135iNreag
13
Rep 336
Posts |
Coolingmist 2.3 Gallon Meth Tank Venting Question
Does anyone know if this meth tank's vented cap should be vented outside the car or if it acts as a 1-way vacuum?
http://coolingmist.com/pagedisplay.aspx?pid=Protank1 Any comments are much appreciated! Thanks. |
11-20-2013, 10:23 PM | #2 |
Lieutenant
72
Rep 524
Posts |
I believe that they are one way vented only allowing air in and not allowing fumes out.
__________________
2010 AW/BLK 135i VM 6465 Single Turbo, JB4 + MHD, VRSF CP & Tial, Big Tom, Fuel-It PI + Stage 3 + Return + Ethanol Sensor, BMW PE, MFactory LSD, Spec 3+ & MFactory SMFW, RB External PCV
Best stock turbo 12.5 @ 19.46 spinning all the way down RIP 2008 AW/BL 135i |
Appreciate
0
|
11-21-2013, 09:04 AM | #3 |
Captain
57
Rep 680
Posts |
|
Appreciate
0
|
11-21-2013, 02:52 PM | #4 |
Lieutenant
72
Rep 524
Posts |
Ok since my tank is out of my car I just tried sucking and blowing and I could only suck out of it. Sounds weird as shit but ya lol so at least my BMS tank has a one way vented cap so I'm assuming all of them do.
__________________
2010 AW/BLK 135i VM 6465 Single Turbo, JB4 + MHD, VRSF CP & Tial, Big Tom, Fuel-It PI + Stage 3 + Return + Ethanol Sensor, BMW PE, MFactory LSD, Spec 3+ & MFactory SMFW, RB External PCV
Best stock turbo 12.5 @ 19.46 spinning all the way down RIP 2008 AW/BL 135i |
Appreciate
0
|
11-21-2013, 05:09 PM | #5 |
135iNreag
13
Rep 336
Posts |
Do you have the black 2.3 gallon one? I believe they are all the same.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|