BMW Performance Aero Kit Pictures***

chadillac2000 · 06-02-2017, 12:20 PM

Already have the diffuser and skirts, but that front bumper looks tasty! Especially with some of those subtle lips sitting underneath.

Esteban · 06-02-2017, 01:04 PM

Quote:

Originally Posted by Dackelone

Quote:

Originally Posted by a4nut

Wish I hadn't seen this thread as I didn't even know this existed!

What has been SEEN can not be UNSEEN!!

Now open your wallet and get to buying.

PopsnBurbles · 06-02-2017, 09:02 PM

I always thought the stock msport is already great but this thread convinced me to do perf bumper down some time soon.

E91WAG3N · 06-04-2017, 07:14 PM

Looks great on Le Mans and black! Awesome pics.

deesea · 06-04-2017, 07:32 PM

Quote:

Originally Posted by gotcha43

Here is my spacegrey 125i with Full BMW Performance Exterior.

Are you running any spacers on those 313s? The fitment looks... awesome.

gotcha43 · 06-05-2017, 12:59 AM

Quote:

Originally Posted by deesea

Quote:

Originally Posted by gotcha43

Here is my spacegrey 125i with Full BMW Performance Exterior.

Are you running any spacers on those 313s? The fitment looks... awesome.

Nope, No spacers. Front is very tight with my KW V3 coilover.

ShocknAwe · 06-06-2017, 08:00 PM

Dackelone That red performance widebody is probably my FAVORITE 1er in existence. If I could buy a kit that looked like that, it would be done, like yesterday.

That being said, I've started wondering recently what a BMWP front bumper, Kerscher/N5tuner wide front fenders, and 1M replica rear bumper would look like. Been rubbed twice in parking lots recently (asshole drivers, damage a car and just drive off?!?!), once on the front bumper, and once on the rear bumper (which actually punctured the bumper fascia), so started looking at parts again and seriously pricing M clone vs staying "narrow body".

Kturbos · 06-07-2017, 09:21 AM

Quote:

Originally Posted by ShocknAwe

Dackelone That red performance widebody is probably my FAVORITE 1er in existence. If I could buy a kit that looked like that, it would be done, like yesterday.

That being said, I've started wondering recently what a BMWP front bumper, Kerscher/N5tuner wide front fenders, and 1M replica rear bumper would look like. Been rubbed twice in parking lots recently (asshole drivers, damage a car and just drive off?!?!), once on the front bumper, and once on the rear bumper (which actually punctured the bumper fascia), so started looking at parts again and seriously pricing M clone vs staying "narrow body".

Bad luck with the bumpers.. Live like Vin Diesel. A quarter mile at a time.. Go for the Wide-Body.

ShocknAwe · 06-07-2017, 09:33 AM

Quote:

Originally Posted by Kturbos

Bad luck with the bumpers.. Live like Vin Diesel. A quarter mile at a time.. Go for the Wide-Body.

Interestingly, was looking at the Motorsport-24.de website and found a newer version of their kit that may be essentially the Doerr-Motorsport widebody. Requires performance bumper kit and all. Sent out a few emails to try to get more info.

Kturbos · 06-07-2017, 10:32 AM

Quote:

Originally Posted by ShocknAwe

Interestingly, was looking at the Motorsport-24.de website and found a newer version of their kit that may be essentially the Doerr-Motorsport widebody. Requires performance bumper kit and all. Sent out a few emails to try to get more info.

Oh wow nice. Let me know what info you get. That sounds promising.

Kturbos · 06-12-2017, 06:52 PM

Will post soon

Kturbos · 06-13-2017, 01:22 PM

The CF Lip Splitters for the Aero Front Bumper are scarce. There are the CF splitters that are two separate little CF pieces on each side of the bumper. This picture here shows a full length CF Splitter. Anybody know where to purchase a full length, one piece CF Splitter for the Aero Front Bumper?

Suprgnat · 06-13-2017, 02:04 PM

Um, did you try Rieger (like in the photo) ?

https://www.rieger-tuning.biz/article/00322544+8126595

Quote:

Originally Posted by Kturbos

The CF Lip Splitters for the Aero Front Bumper are scarce. There are the CF splitters that are two separate little CF pieces on each side of the bumper. This picture here shows a full length CF Splitter. Anybody know where to purchase a full length, one piece CF Splitter for the Aero Front Bumper?

Kturbos · 06-14-2017, 06:39 PM

Quote:

Originally Posted by Suprgnat

Um, did you try Rieger (like in the photo) ?

https://www.rieger-tuning.biz/article/00322544+8126595

Lol yeah I did.. Not that retarded. They said their CF splitter does not fit the BMW Performance Aero Front Bumper.. So not sure why that Rieger plate is on the front. The car prob has other Rieger products on the car. Thanks though

Suprgnat · 06-14-2017, 08:22 PM

Quote:

Originally Posted by Kturbos

Lol yeah I did.. Not that retarded. They said their CF splitter does not fit the BMW Performance Aero Front Bumper.. So not sure why that Rieger plate is on the front. The car prob has other Rieger products on the car. Thanks though

LOL. The link, which now leads to a blank page (unless one were to think I'd link to a blank page), was to their Performance Aero Kit Bumper lip. Peeps need to keep their sites updated! Had a great photo and everything, in fact the same photo you posted.

I'm not crazy. My Mother had me tested.

Maybe (now) NLA and they pulled it down after page hits?

So unless some other manufacturer steps up...

Suprgnat · 06-14-2017, 08:38 PM

Quote:

Originally Posted by Kturbos

The CF Lip Splitters for the Aero Front Bumper are scarce. There are the CF splitters that are two separate little CF pieces on each side of the bumper. This picture here shows a full length CF Splitter. Anybody know where to purchase a full length, one piece CF Splitter for the Aero Front Bumper?

https://www.perl-carbon.de/en/artike...nce-front.html

Or a link to the same photo, though I don't have the energy to figure out which one is "Shopped".

Or both.

With very little examination, the "Rieger" photo looks "Shopped".

Kturbos · 06-14-2017, 10:14 PM

Quote:

Originally Posted by Suprgnat

https://www.perl-carbon.de/en/artike...nce-front.html

Or a link to the same photo, though I don't have the energy to figure out which one is "Shopped".

Or both.

With very little examination, the "Rieger" photo looks "Shopped".

Haha great investigation!! That photo is 100% shipped from the Perl splitter.

mocaholic · 06-15-2017, 05:01 AM

I can absolutely recommend the Perl Carbon lip; I have one on my E82 M bumper and it fits perfectly, as well as the quality.

ShocknAwe · 06-15-2017, 08:53 AM

Kerscher cf lip fits perf bumper as well. Could also look into the Lightweight splitter. Good luck!

Kturbos · 06-19-2017, 02:07 PM

Nice thanks guys. Will figure out what splitter looks best. The perf kit looks awesome. I will post pics soon!

AGAV13 · 06-30-2017, 10:33 PM

I always wanted the performance bumper but never liked the way it looked on AW compared to all the other colors.

Kturbos · 07-07-2017, 07:46 AM

Quote:

Originally Posted by AGAV13

I always wanted the performance bumper but never liked the way it looked on AW compared to all the other colors.

I think it looks fantastic on AW when you add the CF bits (Trunk Spoiler, Front Splitter, Mirrors etc.) Adds a nice contrast.

06-02-2017, 12:20 PM	#23
chadillac2000 Major 1220 Rep 1,372 Posts Drives: 2015 BMW M3 Join Date: Nov 2008 Location: Asheville, North Carolina iTrader: (7)	Already have the diffuser and skirts, but that front bumper looks tasty! Especially with some of those subtle lips sitting underneath. __________________ 2008 BMW 135i Single Turbo Build Thread HERE 2016 BMW M5 Competition Build Thread HERE 2015 BMW M3 Build Thread HERE
	Appreciate 0 Quote

06-02-2017, 09:02 PM	#25
PopsnBurbles Captain 192 Rep 893 Posts Drives: 135is :) 192/586 Join Date: Mar 2011 Location: LA, CA iTrader: (4) Garage List 2013 BMW 135is Coup ... [10.00]	I always thought the stock msport is already great but this thread convinced me to do perf bumper down some time soon.
	Appreciate 1 Dackelone10527.50 Quote

06-04-2017, 07:14 PM	#26
E91WAG3N Wagon Addict 1248 Rep 1,217 Posts Drives: E39, E91, E91 Join Date: Sep 2015 Location: Las Vegas iTrader: (2)	Looks great on Le Mans and black! Awesome pics.
	Appreciate 0 Quote

06-06-2017, 08:00 PM	#29
ShocknAwe 1Addict 3231 Rep 7,889 Posts Drives: E82 Mutt, M57 Truck Join Date: Jul 2012 Location: Charleston iTrader: (22)	Dackelone That red performance widebody is probably my FAVORITE 1er in existence. If I could buy a kit that looked like that, it would be done, like yesterday. That being said, I've started wondering recently what a BMWP front bumper, Kerscher/N5tuner wide front fenders, and 1M replica rear bumper would look like. Been rubbed twice in parking lots recently (asshole drivers, damage a car and just drive off?!?!), once on the front bumper, and once on the rear bumper (which actually punctured the bumper fascia), so started looking at parts again and seriously pricing M clone vs staying "narrow body". __________________ 2010 135i 6MT Jet Black N54/3 FE82 Mutt \| BUILD THREAD \| GARAGE SALE
	Appreciate 2 Dackelone10527.50 TSum750.00 Quote

06-12-2017, 06:52 PM	#33
Kturbos House Stark 107 Rep 159 Posts Drives: F82 M4 & E82 128i & E36 M3 Join Date: May 2017 Location: Philadelphia, PA iTrader: (0)	Will post soon __________________ Kturbos - E82 128i - E36 M3 - F82 M4 - Dodge Ram Rebel - "Everyone happens to know a few things, and one of the things we knows is, it’s not how you stand by your car, it’s how you race your car. You better learn that."
	Appreciate 0 Quote

06-13-2017, 01:22 PM	#34
Kturbos House Stark 107 Rep 159 Posts Drives: F82 M4 & E82 128i & E36 M3 Join Date: May 2017 Location: Philadelphia, PA iTrader: (0)	This Lip Spoiler The CF Lip Splitters for the Aero Front Bumper are scarce. There are the CF splitters that are two separate little CF pieces on each side of the bumper. This picture here shows a full length CF Splitter. Anybody know where to purchase a full length, one piece CF Splitter for the Aero Front Bumper? Attached Images __________________ Kturbos - E82 128i - E36 M3 - F82 M4 - Dodge Ram Rebel - "Everyone happens to know a few things, and one of the things we knows is, it’s not how you stand by your car, it’s how you race your car. You better learn that."
	Appreciate 0 Quote

06-15-2017, 05:01 AM	#40
mocaholic New Member 36 Rep 15 Posts Drives: BMW 123d E82 Join Date: Apr 2015 Location: Germany iTrader: (0)	I can absolutely recommend the Perl Carbon lip; I have one on my E82 M bumper and it fits perfectly, as well as the quality.
	Appreciate 1 Kturbos107.00 Quote

06-15-2017, 08:53 AM	#41
ShocknAwe 1Addict 3231 Rep 7,889 Posts Drives: E82 Mutt, M57 Truck Join Date: Jul 2012 Location: Charleston iTrader: (22)	Kerscher cf lip fits perf bumper as well. Could also look into the Lightweight splitter. Good luck! __________________ 2010 135i 6MT Jet Black N54/3 FE82 Mutt \| BUILD THREAD \| GARAGE SALE
	Appreciate 1 Kturbos107.00 Quote

06-19-2017, 02:07 PM	#42
Kturbos House Stark 107 Rep 159 Posts Drives: F82 M4 & E82 128i & E36 M3 Join Date: May 2017 Location: Philadelphia, PA iTrader: (0)	Nice thanks guys. Will figure out what splitter looks best. The perf kit looks awesome. I will post pics soon! __________________ Kturbos - E82 128i - E36 M3 - F82 M4 - Dodge Ram Rebel - "Everyone happens to know a few things, and one of the things we knows is, it’s not how you stand by your car, it’s how you race your car. You better learn that."
	Appreciate 0 Quote

06-30-2017, 10:33 PM	#43
AGAV13 Captain 804 Rep 952 Posts Drives: AW 135is (#363/586) Join Date: May 2012 Location: CT 860 iTrader: (2)	I always wanted the performance bumper but never liked the way it looked on AW compared to all the other colors. __________________ CURRENT 2017 Boxster S ?718? (07/27/18) 2018 Jeep Wrangler Unlimited Rubicon Recon - (10/28/18) SOLD 2013 BMW 135is #363/586 - AW, Black Boston Leather w/ Exclusive Blue Stitching, Prem., Tech, DCT, Heated Seats, HK
	Appreciate 0 Quote