Will these wheels fit?

[imske3000]

Hi Guys,

I am looking at getting some custom wheels made and wanted some advice. Will these fit without rubbing? I am on stock suspension.

Front: 19x9.5 ET25 w 265/30/19
Rear: 19x10.5 ET24 w 285/30/19

Thanks

[HimHim1104]

For your reference, I'm running this with no rub.

Front: 19 x 10J ET10 w 245/35/19, Camber 2.1'
Rear: 19 x 11J ET18 w 265/35/19, Camber 1.4'

IMO, I'll suggest you get front 10J and rear 11J for more tire stretch to fit easier on those size of tires.
Offset should be fine I'm running way lower than your willing setup.

[HimHim1104]

For your reference that's my setup if you can't imagine my numbers.....

[T1M]

Quite a bit of stretch with a 265 on an 11" rim. People tend to want more tyre on the rear on these cars, something like a 10.5" with a 285 for example.

Imske - i've been warned off going over 255 on the front due to rubbing on the inner guard liner. That was a 265 on a 9.5+22 rim so if you went 265 on a 9.5/+25 you'd have 3mm less offset and it'd rub worse.

[imske3000]

Originally Posted by T1M

Quite a bit of stretch with a 265 on an 11" rim. People tend to want more tyre on the rear on these cars, something like a 10.5" with a 285 for example.

Imske - i've been warned off going over 255 on the front due to rubbing on the inner guard liner. That was a 265 on a 9.5+22 rim so if you went 265 on a 9.5/+25 you'd have 3mm less offset and it'd rub worse.

i agree, 265 on an 11" is pretty stretched, the stock setup is already stretched.

@ Tim - did you run a 255/35 on your 9.5" ET22 and no rub? its pretty common to run 265/30 on this setup but i dont want to go the lower profile