![]() |
![]() |
![]() |
![]() |
|
![]() |
Post Reply |
|
Thread Tools | Search this Thread |
05-01-2022, 07:03 PM | #1 |
Private
![]() 9
Rep 71
Posts |
BMW 135i Complete Brakes (calipers, rotors, oe pads and PFC front) m4 lines!
Hello! I've got a set of bmw 135i brakes available (I went for f8x brakes front/rear). Socal local pickup only ![]() These came off at 110k and 3 track days. The braking feel and performance (with pfc front pads) was insane and definitely much better than m4 calipers/rotors with oe pads. I reused my 135i brake lines, so I'm including low mileage m4 brake lines. Includes: Left and right 6 piston front calipers Left and right rear calipers rotors front/rear oe pads front/rear PFC-08 pads front mounting brackets rotor hardware (retaining hex bolt) m4 brake lines I'd recommend installing aluminum pistons if installing, since I've heard stories of the ceramic pistons cracking if abused on track. I don't drive with a stabby foot and have not experienced this personally, just a suggestion ![]() Great performance and aesthetic upgrade for the 128 guys! Let me know if you have any questions, I'll do my best to respond quickly. Thanks, Graham |
05-01-2022, 07:06 PM | #2 |
Private
![]() 9
Rep 71
Posts |
BTW: PFC pads are installed in the front calipers in the photos above! The extra pads outside are OE, I believe textar but not 100% sure. Fine for street but they'd get cooked if you try to track on them. Pfc's are a bit noisy but the feel & performance is to die for
![]() |
Appreciate
0
|
06-20-2022, 03:50 PM | #6 | |
Banned
-2
Rep 10
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|