FS: ATM FMIC, 1M/M3 Steering Wheel, Crank Seal Guard, & More...

[Bullitt]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

Garage is being cleared out so these parts must go! All items are in good condition or brand new as specified. Prices do not include shipping, which will be calculated based on your zip code, continental U.S. only.

If there's any interest at all, please don't hesitate to make me an offer via PM!


1. ATM FMIC (Ambient Thermal Management Intercooler) - Arguably the best bar&plate intercooler for the N54/N55 with stock turbos

• Condition: Used for 33,500 miles
• Details: Engineered with a stepped core design as one single assembly, setting it apart from all other FMIC manufacturers. Features rounded cast endtanks for improved airflow efficiency and bar-and-plate construction with exclusively unique rounded header bars, which act as a velocity stack for the charge rows, increasing flow efficiency from 80% to 98%. Includes aluminum elbow connection to charge pipe. More details: ATM Speed Shop
• Price: $360 >>> SOLD

2. 1M/M3 Leather Steering Wheel - Feels thicker, plusher, and more comfortable than the stock steering wheel IMHO

• BMW Part #: 32302283733
• Condition: Used for 37k miles with routine leather care (Zaino Z9 + Z10).
• Price: $380 >>> SOLD

3. SPL Adjustable Rear Endlinks (E8x/E9x M and Non-M) - A must-have if you changed your stock rear swaybar

• Condition: Brand new, sealed in original packaging
• Price: $180 >>> SOLD

4. Techna-Fit Front Stainless Steel Braided Brake Lines for Stock Calipers - Arguably the best on the market

• Condition: Brand new
• Details: Includes keyed female fittings like the stock setup. These are no longer produced! Recommended and used by forum member fe1rx (forum link)(another forum link).
• Price: $40 >>> SOLD

5. P3 Vent Gauge V1 - Most stealth gauge for boost without using your OBD2 port like the later versions

• Condition: Used
• Details: Pre-installed in factory vent for analog boost and vacuum readings.
• Price: $100 >>> SOLD

6. 1 Series Stock Door Sills - Perfect for replacing worn ones or restoring a factory-fresh look

• Condition: Like new
• Details: Factory door sills
• Price: $60 >>> SOLD

7. Malo Industries Crank Seal Cover Guard Plate - Avoids any chance of catastrophic engine damage

• Condition: Brand new
• Details: Provides N54/N55 crank seal protection. Product page
• Price: $45 >>> SOLD

8. Power Steering Metal Pulley - Durable and reliable upgrade

• Condition: Brand new
• Details: Upgrades the stock plastic one
• Price: $25 >>> SOLD

9. HP Autosport Adjustable Front Endlinks (E8x/E9x Non-M) - A must-have for lowered suspension and/or upgraded front swaybar

• Condition: Used about 45k miles
• Details: Two of the joint ends were replaced in the last 10–15k miles due to cracked boots. Washers are missing and not included. forum link / product page
• Price: $40 >>> SOLD

10. Swift Springs front & rear

• Condition: Used only a few thousand miles
• Front: 7" 65mmID Z65-178-070 7.0 kgf/mm or 392lbs/inch
• Rear: 9" 60mmID Z60-228-140 9.0 kgf/mm or 784lbs/inch
• Price: $40 per pair >>> SOLD

11. Garage Sale Round 2, including Meisterschaft Mids - * HERE *


Terms:

• Shipping costs TBD based on your zip code (CONUS)
• Payment: PayPal only. Please add 3.5% to the total to cover PayPal goods and services fees, or use the “Friends & Family” option
• Items will be shipped within 48 hours of payment.

Thanks for looking, and feel free to PM with any questions!

[Bullitt]

Photos

[Bullitt]

Added another item:

Swift Springs front & rear

• Condition: Used only a few thousand miles
• Front: 7" 65mmID Z65-178-070 7.0 kgf/mm or 392lbs/inch
• Rear: 9" 60mmID Z60-228-140 9.0 kgf/mm or 784lbs/inch
• Price: $60 per pair

[Bullitt]

Dropped prices

Door sills sold

[Mach8-0]

PM'd

[Bullitt]

SPL rear endlinks, HPA front endlinks, metal PS pulley sold

[Bullitt]

Dropped prices

Techna-Fit SS brake lines sold

[shogun_128]

Unable to PM as fairly new but interested in those springs.

[Bullitt]

Originally Posted by shogun_128

Unable to PM as fairly new but interested in those springs.

Write your PayPal email, name, and verified address for shipping, specify the springs you want, include your 1addicts username, take a screenshot, then upload it to my Dropbox: [link deleted] and I’ll send you a PayPal invoice for the springs. Then immediately post a reply to this here notifying me you did it (so I know it was you)

[Bullitt]

P3 vent gauge sold

Dropped prices

[shogun_128]

Originally Posted by Bullitt

Write your PayPal email, name, and verified address for shipping, specify the springs you want, include your 1addicts username, take a screenshot, then upload it to my Dropbox and I’ll send you a PayPal invoice for the springs. Then immediately post a reply to this here notifying me you did it (so I know it was you)

Just posted to your Dropbox. Thank you for the solution. Much appreciated.

[Bullitt]

shogun_128 Invoice sent!

EDIT 12:06PM:
PayPal notified me that the invoice cannot be delivered because “the email address was incorrect or the inbox was full” - I just double checked the email address, so it must be full

[shogun_128]

Originally Posted by Bullitt

shogun_128 Invoice sent!

EDIT 12:06PM:
PayPal notified me that the invoice cannot be delivered because “the email address was incorrect or the inbox was full” - I just double checked the email address, so it must be full

Just got it. Weird that it would say that.
Just to clarify both front and rear set, correct?

[Bullitt]

^ Correct. Payment received - expect to ship this afternoon and your PayPal invoice will be updated with the tracking number

[Bullitt]

1M/M3 steering wheel and Swift springs sold

[AZ1]

I’m interested in 1 and 7 to 85262.

[Bullitt]

Originally Posted by AZ1

I’m interested in 1 and 7 to 85262.

PM sent

[Bullitt]

ATM FMIC and crank seal guard sold

Round 2 of garage sale, including Meisterschaft Mids, here: https://www.1addicts.com/forums/show...1#post31751511