AEM Multi Input Meth Kit 30-3350 Install Advice N55

[Rob_BMW_PNW]

Posted on another page, figured I would try here too

http://aemelectronics.com/files/inst...Controller.pdf

I chose this kit because apparently there isnt a boost hose of any sort to tee/tap into on the N55

I am a total wiring noob. For the most part it looks simple, but where do I hook up the 'yellow' to a 12v supply? And do I just tap/solder/crimp (whatever lingo) into the positive MAP sensor wire for the 'blue' external MAP? Is there any reason why I cant tap into the TMAP sensor?

Why not the boost controller (sensor near the washer fluid)?
http://www.e90post.com/forums/attach...1&d=1438655028

If anyone else that has used a similar kit (not BMS) can chime in that would be great.

Thanks!

[Rob_BMW_PNW]

Still looking for some advice..

[Xer0449]

Ever get this sorted out? I'm having the same kit put in today.

[Rob_BMW_PNW]

Originally Posted by Xer0449

Ever get this sorted out? I'm having the same kit put in today.

Tap into the yellow TMAP sensor wire
It will go off of TMAP voltage

[Havocsteve]

Whenever I cut wires, always solder. Sure it takes longer but honestly, your getting 100% connection. Also put a on sleeve over it, or if you want to go the newb way, electrical tape it.

[Exept19]

I have the same kit it is plugged but it sprays when car is on ON position i have to max out the knobs sonit can stop but once the car is started i can adjust them correctly

Weird

[Xer0449]

Checking in...

Rob_BMW_PNW still running the same setup? I'm revisiting this option but on the BMS meth kit sans JB4.

[galifardo1971]

hey rob, how was with your kit, every one say that is better a brand that has integration with jb4, how are you going....