|
|
|
03-13-2019, 07:15 PM | #1 |
Captain
54
Rep 639
Posts |
Issues with VRSF Charge Pipe
I just purchased a VRSF Charge Pipe for my 135i. As I was putting the charge pipe together to mount in the car I discovered that my MAF won't fit the charge pipe. The stock charge pipe on my car has a third tube coming out between the two diverter tubes. The MAF actually mounts to part of this tube and appears to be longer than the MAFs without this third tube. My car was built in August of 2009. Has anyone else run into this problem?
__________________
2009 BMW LeMans Blue 135i/Dinan Stage 2 tune/Alufelgen SF-71s/M3 suspension components/Koni Sport adjustable dampers/ETS FMIC/M3 paddle shifters/Alpina B3 TCU flash/VRSF charge pipe
|
03-16-2019, 10:18 PM | #2 |
Captain
54
Rep 639
Posts |
Thanks to VRSF support for responding so quickly to my inquiry, confirming that its charge pipe works on my car and giving me advice on how best to install the sensor. The car now runs great again. I put 200 miles on the car going to Virginia and back today and the car ran great.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|