What did you do to/for your 1er today?

[WrathOTM]

New Turner front sway bar end links to replace the Bimmerworld pair. No more clunks, thank you Jesus. Did hopefully set the sway bar to the closest to correct position and the rear too. WAY happier now.

[mkeiser]

gave the bimmer a spa day... wash, clay bar, wax, leather clean/condition/protect, windows cleaned+rainx windshield, and 303 all over interior.

[WeryPert1]

Failed to replace my engine air filter. These two things are not the same.

Guessing I inadvertantly ordered the N52 version but I have the N51. Also need to order 2 airbox screws, as mine was missing one and had something not OE for another.

[WeryPert1]

Update: looks like I ordered the 135i Air Filter not the 128i. My fault: i had my 'vehicle' set as the 135i because I was shopping rotors and pads, as I'm about to install 135i brakes on my 128i.

[GoRomeo]

Getting ready for take off…

Happy Sunday Driving! 😎

[duperdog]

First AutoX of the season. Car feels so much better with suspension updates and better tires. Driver needs a lot of work but I felt like the car was not the limiting factor as it was last season. I have to figure out how to overlay GoPro video with trackaddict. My runs were pretty consistent, but I'm not sure if that is bad or good. I had an instructor ride along with me on my last run which was really helpful. Need to ride along with some others to see how they are different at the next event.

HPDE upcoming at Pitt Race next month so need to focus next maintenance work on stopping (calipers, pads, fluid, lines).

[nevetstoj]

Originally Posted by djacinto

Just started looking into this. What part number mirror did you end up using?

Hey, sorry just seeing this now.

The mirror was off a 2008-ish (i want to say) 330i. Ill see if I can get a part number later. Just looking at fcp there are a few.

[mkeiser]

rainy day and bored after work... did the lil' rear fog mod.

[lemansblau135is]

Washed her Sat. Went to cars n coffee Sun. Fun following my friends S55 AMG down a winding river road and back. About 30 minutes each way. Nice cars, too.

[jdt10768]

Originally Posted by mkeiser

rainy day and bored after work... did the lil' rear fog mod.

Easy mod? Let's hear some more details on your mod. No swearing involved?

[mkeiser]

Originally Posted by jdt10768

Easy mod? Let's hear some more details on your mod. No swearing involved?

Very easy! I used this thread for gaining access to the button... https://www.1addicts.com/forums/showthread.php?t=209558

Then I just used a box cutter to cut three of the four little tabs off the back of the button. I can't find any pics (and I didn't take any during the process) but it's pretty self explanatory once you gain access to it.

The top left tab is a little tough to get access to, so I did the other three tabs first and then just broke the last tab by pressing down on the button.

I read online that this trick only works for 2011+ 1 series. 2008-2010 will need a whole new Euro Switch? Unsure of the validity of that but it worked on my 2011...

If it's rainy after work today (which I think it will be), maybe I'll take it apart again and take some pics along with pics of the rear fog in use.

[jdt10768]

Originally Posted by mkeiser

Very easy! I used this thread for gaining access to the button... https://www.1addicts.com/forums/showthread.php?t=209558

Then I just used a box cutter to cut three of the four little tabs off the back of the button. I can't find any pics (and I didn't take any during the process) but it's pretty self explanatory once you gain access to it.

The top left tab is a little tough to get access to, so I did the other three tabs first and then just broke the last tab by pressing down on the button.

I read online that this trick only works for 2011+ 1 series. 2008-2010 will need a whole new Euro Switch? Unsure of the validity of that but it worked on my 2011...

If it's rainy after work today (which I think it will be), maybe I'll take it apart again and take some pics along with pics of the rear fog in use.

Thanks, did you get a new switch or new button w/ fog symbol, or just use existing blank button?

[N55135i]

My local shop installed a meyle front control arm kit, whiteline rear subframe inserts, & serviced the A/C for only 220€

[mkeiser]

Originally Posted by jdt10768

Thanks, did you get a new switch or new button w/ fog symbol, or just use existing blank button?

just using the existing blank button.

[dfox]

I did some digging and here's the tab-cutting link with some photos.

https://www.1addicts.com/forums/showthread.php?t=610664

I'll have to give this a go!

[Donkeyshins]

Originally Posted by dfox

I did some digging and here's the tab-cutting link with some photos.

https://www.1addicts.com/forums/showthread.php?t=610664

I'll have to give this a go!

If you have one of the switches without the plastic LEGO-y bit behind the rear fog blank, I have an already-modified switch I don't need that you can have.

[Childish_cambino]

Originally Posted by Almuliman

Took my 1er to the BMW CCA HDPE at Pacific Raceways yesterday. First time I've been on track, so it was ... educational

Car did great, other than it turns out I made the wrong decision in not going with race fluid for the brakes. I knew it was a roll o' the dice, but I didn't figure I'd be doing enough heavy braking often enough at PIR to need it. I was wrong. Kept losing the brakes going into turn 2A after 4-5 hot laps – taking it easy for a lap got them back to "good enough" for another hot lap, but that was it. Lesson learned.

As for the driver upgrade, there was significant progress throughout the day. I figured out 2A/2B well enough to consistently not get it *all* wrong, found a great flow through 5A, 5B, and 6, and now know that I need to work a lot on 3A/3B next time. I had a little off in 3B in the very last session of the day when I was experimenting with taking 3A/B in 2nd, but otherwise made it through without incident.

I've been wanting to do a track forever, but just never got around to it. So glad I can finally check that box, but of course that's not the end of it. Way too much fun to just do once.

Love it. Absolutely addicting isn’t it?

Unfortunate about the brake fluid, I run Motul 600 and have no issues with it getting hot. I’ve had issues with my pads though, so I’d recommend investing in those too

[Childish_cambino]

Threw this Flow Designs splitter on, absolutely love the look. In other news I picked up the car from the shop this morning after having the door lock actuator replaced, the bill was eye watering

[Finneganistan]

Originally Posted by Childish_cambino

Threw this Flow Designs splitter on, absolutely love the look. In other news I picked up the car from the shop this morning after having the door lock actuator replaced, the bill was eye watering

That splitter looks really good on your car! Mine's black and I think it would just disappear.

[tjswarbrick]

Rolled past 150,000 miles:



Also, replaced the ER charge pipe with the CARB-exempt COBB:



On a side note, the wife's '18 X3 M40i recently passed 62,000 miles, and the extended warranty just expired. So it developed a coolant leak.
Busy night.

[tracer bullet]

I scheduled a PPI with a local shop, to sell mine to a coworker. On the upside he's an enthusiast, if he takes it it'll definitely be a good new home.

2025 manual Z4 M40i on it's way!

[tjswarbrick]

Originally Posted by tracer bullet

I scheduled a PPI with a local shop, to sell mine to a coworker. On the upside he's an enthusiast, if he takes it it'll definitely be a good new home.

2025 manual Z4 M40i on it's way!

Oh! The Handschalter! Love it! My dealer didn't even know it existed. Seems the perfect replacement for a tired 135i. I hope they make enough that I can get one once the home remodel is complete.