|
|
|
12-25-2017, 09:59 AM | #1 |
Second Lieutenant
137
Rep 272
Posts
Drives: 2013 X5 35i M Sport AW3
Join Date: Feb 2017
Location: Los Angeles, California
|
128i PSS9 + 60MM linear springs
I havent hit the track yet but I will In the next year or so and I want my 128i to be setup just right. Maybe you guys can help.
Here is my current suspension/brake setup for best recommendations: PSS9 coilovers Solid rear subframe bushings M3 control arms F&R GC street plates (will install once I acquire Springs) F30 BBK My thoughts: I was thinking Front - 350lb 7” Rear - 500 6” The car will driven on the street, but I’m building this to destroy on the track and be somewhat tolerable on the street. Thoughts and suggestions? Thanks in advance! |
12-29-2017, 08:53 PM | #2 |
Colonel
232
Rep 2,643
Posts |
You should be able to keep the PSS9 springs for your intended usage without any issues.
Later if you want to increase the spring rates for track use, you will want higher than 500lb spring rate on the rear. That's my suggestion to get balanced handling with less understeer. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|