Coding out the MOST bus - any advice?

[fe1rx]

I have removed all the physical parts of the MOST bus from my car (with the exception of the radio head unit, which doesn't need it to operate). The car originally came with iPhone integration and telephone provisions (high charger / bluetooth module), but these have been removed along with all the MOST fiber cables.

Does anyone know what needs to be coded out so the car doesn't look for it?

At the moment a scan shows a MOST bus error, because something is still looking for it.

[amg6975]

It's probably going to be in the RAD2 module. I can look later but I wouldn't be surprised if it's not possible to code out if the radio is still there. I took out everything but the radio and just looped the MOST back and don't get an error. I figure the fiber cable weighs almost nothing so might as well leave it.

There are options in the KOMBI to just not display errors, I had to "nicht_aktiv" one for the Combox to not throw the emergency call system.

If you google my user name and "Track Car Coding" there's a thread on another forum with some additional details that may help.

[fe1rx]

Originally Posted by amg6975

It's probably going to be in the RAD2 module. I can look later but I wouldn't be surprised if it's not possible to code out if the radio is still there. I took out everything but the radio and just looped the MOST back and don't get an error. I figure the fiber cable weighs almost nothing so might as well leave it.

There are options in the KOMBI to just not display errors, I had to "nicht_aktiv" one for the Combox to not throw the emergency call system.

If you google my user name and "Track Car Coding" there's a thread on another forum with some additional details that may help.

Thanks, your suggestion led me pretty directly to disabling RING_STATUS_20 in RAD2 Coding with Protool. I think that got it, but the error takes a while to show up. It got rid of a clicking noise in the speakers that I suspected was related, so I am optimistic.

[amg6975]

Originally Posted by fe1rx

Thanks, your suggestion led me pretty directly to disabling RING_STATUS_20 in RAD2 Coding with Protool. I think that got it, but the error takes a while to show up. It got rid of a clicking noise in the speakers that I suspected was related, so I am optimistic.

Yeah, that should be the one. The clicking is definitely the open MOST loop.