|
|
|
09-12-2009, 10:00 AM | #1 |
Colonel
104
Rep 2,474
Posts |
M3 front suspension parts
Well the wishbones and tension rods are in
cost: $245 to install and align. Results: Toe: before alignment = 2 degrees in after = 1/16 in Left camber -1.0 degree Right Camber - 0.75 degree Average camber from Larry's tool = - 0.6 degrees feel: Crisper? Definitely cornering? Feels more planted faster at autocross? Maybe not faster, but thats my own fault. The turning was greatly improved. overall decision after a couple of twisty's: need more rear grip coming out of turns with foot on the gas. This was verified on the first lap of autocross. 360 baby! Next: front sway. See below
__________________
AW 135i w/ blackette, performance short shift kit, BMW alarm, Performance rotors, APEX ARC-8 wheels, Direzza Star Spec 235/275, Dinan stage 3 suspension, M3 wishbones/tension rods/front sway/rear subframe bushings and thats all folks! Last edited by arrutled; 09-24-2009 at 08:50 AM.. |
09-13-2009, 10:00 AM | #2 |
Lieutenant General
2146
Rep 10,176
Posts |
Congrats! I'm really surprised that you didn't get a little more negative camber. I might be misremembering, but I thought reports were that with the M3 parts, you get to -1.5 deg, and the removal of the alignment pin would get to ~-2.3-2.4
|
Appreciate
0
|
09-13-2009, 10:08 AM | #3 |
Major
44
Rep 1,265
Posts |
I did the front alignment pin removal and it only gave me -.2* of camber.
Congrats on the upgrade. Ionnotti and I will be smoking you next weekend after yesterday tho... lol |
Appreciate
0
|
09-13-2009, 10:26 AM | #4 |
winter mode
62
Rep 2,057
Posts
Drives: 08 135i, 88 M3
Join Date: Aug 2008
Location: Somerville, MA
|
FACT
__________________
88 M3: BMWCCA J Sport
08 135: because streetcar |
Appreciate
0
|
09-13-2009, 11:16 AM | #5 |
Lieutenant General
2146
Rep 10,176
Posts |
Point of clarification.. it only ADDED -.2 deg (I had more than -.2 deg from the factory)? There are a few others here who wound up with -.6 deg total after alignment pin removal. I slotted mine an additional 3/16", and now have a total of -1.6 to -1.7 camber. I was banking on having -2.3 (or so) deg with the M3 parts.
Did you know that I have a pretty nice camber gauge in the Chapter AX van? It is under the passenger seat. We can do some comparos on Sunday! |
Appreciate
0
|
09-13-2009, 09:05 PM | #6 |
Colonel
104
Rep 2,474
Posts |
I don't think Ive ever beat either one of you! But you give me added motivation!
__________________
AW 135i w/ blackette, performance short shift kit, BMW alarm, Performance rotors, APEX ARC-8 wheels, Direzza Star Spec 235/275, Dinan stage 3 suspension, M3 wishbones/tension rods/front sway/rear subframe bushings and thats all folks! |
Appreciate
0
|
09-13-2009, 09:09 PM | #7 | |
Colonel
104
Rep 2,474
Posts |
Quote:
Also, dont your springs give you a bit additional camber?
__________________
AW 135i w/ blackette, performance short shift kit, BMW alarm, Performance rotors, APEX ARC-8 wheels, Direzza Star Spec 235/275, Dinan stage 3 suspension, M3 wishbones/tension rods/front sway/rear subframe bushings and thats all folks! |
|
Appreciate
0
|
09-13-2009, 09:31 PM | #8 |
winter mode
62
Rep 2,057
Posts
Drives: 08 135i, 88 M3
Join Date: Aug 2008
Location: Somerville, MA
|
no idea...i'd guess pretty close to 0 though
__________________
88 M3: BMWCCA J Sport
08 135: because streetcar |
Appreciate
0
|
09-14-2009, 07:11 AM | #9 |
Lieutenant General
2146
Rep 10,176
Posts |
Yes, lowering gives you added negative camber, for sure. Former moderator 'mikeo' is not lowered, and we removed our alignment pins at about the same time. He got to -.6 deg with just the alignment pin removal, and sliding the strut over. At the same time, since I was lowered and with the additional slotting, I was at -1.6.
Front the factory, it is supposed to be -.2 to -.3 up front. So, I was wondering if WITH the M3 parts, arrutled is now at -.2 deg?? That means the M3 parts did little for arrutled, if that's where he's at right now. I agree with ALL that it would be great to have some nice weather on Sunday, and we can grab the camber tool to see where we are all at. Because of the potential for not being level, we normally take a left and right reading, then average. |
Appreciate
0
|
09-14-2009, 07:56 AM | #10 |
Change for a Nickle?
14
Rep 875
Posts |
If I read this correctly, the max negative camber from the factory is approximately -0.3 deg. Andy's car following the M3 part install was left at -1.0 deg (left, which should be at the limits with the alignment pin still installed) and -0.75 deg (right, providing a 0.25 deg difference left to right for drivability on a crowned road). Therefore, the M3 part install added somewhere in the ballpark of 0.6 to 0.7 deg of negative camber, which is right in line of what Larry was told by others that had done the M3 part install.
__________________
"I tasted death many times on the river today. Do you want to know what it tasted like? Do you REALLY want to know? Well I'll tell you then: it tasted like BEEF JERKY." - unknown paddler 8/1/09
|
Appreciate
0
|
09-14-2009, 08:52 AM | #11 | |
Colonel
104
Rep 2,474
Posts |
Quote:
The m3 parts did exactly what was expected of them.
__________________
AW 135i w/ blackette, performance short shift kit, BMW alarm, Performance rotors, APEX ARC-8 wheels, Direzza Star Spec 235/275, Dinan stage 3 suspension, M3 wishbones/tension rods/front sway/rear subframe bushings and thats all folks! |
|
Appreciate
0
|
09-14-2009, 06:52 PM | #13 |
Lieutenant General
2146
Rep 10,176
Posts |
|
Appreciate
0
|
09-15-2009, 04:30 PM | #14 |
Private
12
Rep 77
Posts |
Don't mean to thread-jack, but...
How do you get more negative camber on the front wheels from factory? I assume the "pin" removal will allow just a small fraction of negative camber. Are there other ways to adjust/configure for more negative camber? Edit: Never mind. I looked at the strut-top and realized they can be rotated for minor adjustments. Last edited by sodara; 09-15-2009 at 06:13 PM.. |
Appreciate
0
|
09-17-2009, 10:34 AM | #15 |
Private First Class
4
Rep 189
Posts |
How can i do to removal the front alignment pin? anydody have a grafic of this.
__________________
135ijb3, h & r filter, SSK, CDV,clutch stop, klracing fmic,seccond catted ,225-255 michelin ps3, E93F-E92R swaybars.M3 parts front.M3 tension rear.Plates mod(F-2,0º R-1,5º).Bilstein + stock springs.Ps rotors.Subframe bushings.Weichers fstruut.Finally mods sdiff and raceland dp.
|
Appreciate
0
|
09-17-2009, 10:39 AM | #16 | |
Private First Class
5
Rep 114
Posts |
Quote:
|
|
Appreciate
0
|
09-17-2009, 01:15 PM | #17 |
Private First Class
4
Rep 189
Posts |
Thanks sysfailur. my poor language dificult my search.
__________________
135ijb3, h & r filter, SSK, CDV,clutch stop, klracing fmic,seccond catted ,225-255 michelin ps3, E93F-E92R swaybars.M3 parts front.M3 tension rear.Plates mod(F-2,0º R-1,5º).Bilstein + stock springs.Ps rotors.Subframe bushings.Weichers fstruut.Finally mods sdiff and raceland dp.
|
Appreciate
0
|
09-23-2009, 08:33 PM | #18 |
Colonel
104
Rep 2,474
Posts |
OK, So Mike and I just installed the M3 front sway. As opposed to buying endlinks for 100 bucks I bought the 26.5 mm M3 sway for 205 bucks from HP autowerks. Installs easily and does not have the 19mm kink ours has. Weighs the same. The stock bar also does not have the washers to prevent the bushings from moving along the bar and the M3 bar does have these washers. The bushings it comes with are much better engineered and a stiffer rubber. Just install the new brackets facing the correct direction!!!! right mike? Ok, so the test drive you are wondering? Well, first off were some quick turns. I felt much more confident flooring it out of the turn (very noticeable on on ramps as well). At no point was I worried about too much torque oversteer which plagued me last autocross (1 complete 360 and saved another spin luckily both coming out of right sweepers). Secondly was some simulated slaloming. I got up to 50 MPH before I felt any loss of traction. We will see if this is in my head this weekend at autocross! Cheers. No loss in ride quality either!
BTW I have the sway Larry gave me and the bushings to go along with it. If you would like this sway im sure larry wouldnt mind if I passed it along.
__________________
AW 135i w/ blackette, performance short shift kit, BMW alarm, Performance rotors, APEX ARC-8 wheels, Direzza Star Spec 235/275, Dinan stage 3 suspension, M3 wishbones/tension rods/front sway/rear subframe bushings and thats all folks! Last edited by arrutled; 09-24-2009 at 08:56 AM.. |
Appreciate
0
|
09-23-2009, 08:48 PM | #19 |
Change for a Nickle?
14
Rep 875
Posts |
I don't wanna talk about it.... Just be glad I didn't get the cutoff wheel out and just trim the tab down. And, yes, I did think about it.
__________________
"I tasted death many times on the river today. Do you want to know what it tasted like? Do you REALLY want to know? Well I'll tell you then: it tasted like BEEF JERKY." - unknown paddler 8/1/09
|
Appreciate
0
|
09-24-2009, 08:59 AM | #20 |
Colonel
104
Rep 2,474
Posts |
for anyone working with mike in the future and he yells mother f'er or G'Damn't (twice in two weeks) from under the car and won't tell you whats wrong don't worry because he knows how to fix stuff! Thanks for the excitement though mike!
__________________
AW 135i w/ blackette, performance short shift kit, BMW alarm, Performance rotors, APEX ARC-8 wheels, Direzza Star Spec 235/275, Dinan stage 3 suspension, M3 wishbones/tension rods/front sway/rear subframe bushings and thats all folks! |
Appreciate
0
|
09-24-2009, 09:45 AM | #21 |
Change for a Nickle?
14
Rep 875
Posts |
It wouldn't have been so bad if I hadn't taken the directional parts under the car with me to make sure I knew which direction the went.... and still put things together backwards. Actually, I think I put it together upside down, which turned out to be backwards once under the car.
__________________
"I tasted death many times on the river today. Do you want to know what it tasted like? Do you REALLY want to know? Well I'll tell you then: it tasted like BEEF JERKY." - unknown paddler 8/1/09
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|