05-15-2022, 07:08 PM | #1 |
Registered
0
Rep 2
Posts |
Need Help! BMW 1M rear M badge template
Hi Guys, I need you guys to help with a 1M rear M badge location measurement or template. much appreciated. basically, I can't find any information online.
|
05-15-2022, 07:44 PM | #2 |
Thread killer
652
Rep 1,900
Posts |
I just measured mine using the lower right hand corner of the "M" as a reference point.
That corner is 7/16" above the horizontal trunk line. The right-hand edge of the M badge also sits every-so-slightly inboard (i.e. to the left) of the corner point of the trunk where the two pieces of metal come together. If you were to imagine a vertical line running up towards the ceiling from that corner, the edge of the M badge is approximately 1/32" to the left of that imaginary vertical line. The lower left-hand corner of the badge (i.e. where it's light blue) is 13/32" above the horizontal trunk line, I'm assuming because the trunk is curved and the bottom edge of the badge is straight. Happy to try to clarify my cryptic measurements -- it's the best I could do. I'm sure there someone here with something better than a tape measure! |
Appreciate
2
1M Tex270.00 seis-speed2564.50 |
Post Reply |
Bookmarks |
|
|