|
|
|
08-04-2023, 11:33 AM | #1 |
J
367
Rep 697
Posts
Drives: BMW 128i
Join Date: Feb 2019
Location: Connecticut
|
If you track your car - share alignment specs plz
Hey guys, I wanted to see if I could make a catch all post for posterity. I'm sure others would love to have a result pop up when they search.
I'm looking for a good alignment starting spot for my setup: Bilstein PSS9 Dinan Camber plates Stack arms all around Poly subframe and differential bushings 15mm E9x rear sway bar This is where I am starting before I spend another dime on upgrades. I want the track/ autocross experience to guide me on future upgrades. So would you mind sharing your camber settings and another other information that could help myself and others? I hope this thread gets some engagement. Thanks! |
08-10-2023, 11:29 AM | #2 |
New Member
2
Rep 6
Posts |
These cars come stock with understeer prioritized so to correct I added m3 control arms, m3 front and rear sways, m3 subframe bushings, poly diff bushings, adjustable toe and camber arms, and ground control camber plates with koni struts and eibach springs. Car now handles amazingly around the track and is very easy to catch and feel over and understeer. Alignment specs are:
Camber: -3 front -2.5 rear Toe: 0.11 front 0.15 rear Caster: as close to 7 as they could get (6.8) Thrust angle: 0 |
Appreciate
1
Blau366.50 |
Post Reply |
Bookmarks |
|
|