|
|
|
05-21-2020, 07:12 PM | #1 |
New Member
2
Rep 9
Posts |
FS: N5Tuner Widebody for 1 series
Up for sale is front and rear widebody from N5Tuner. The fronts were previously installed on my car, but removed to do true 1m. At this point I've decided against mounting the rears and doing true 1m there as well. The front right has a chip on wheel well from tire rub and the left has a chip in the lower corner near the door, but both should be able to be easily repaired by a body shop. I was honestly surprised by the front fitment, and could be a good way to do a budget widebody. The kit goes for a bit over $1100 pre shipping, make a fair offer and it's yours. Text me at 760)468-6170 if interested
|
05-22-2020, 12:32 AM | #3 |
Colonel
701
Rep 2,430
Posts |
just curious. what size tires and what wheel specs were you running that were still rubbing?
__________________
|
Appreciate
0
|
05-22-2020, 01:38 AM | #4 |
New Member
2
Rep 9
Posts |
I believe it’s the apex 18x8.5 et35 but I was running a 10mm spacer to clear the coilover. The tire was a 245/40-17. The alignment shop also did a bad job and didn’t give me any camber because they didn’t want to be liable for uneven tire wear. I’m not entirely sure what the largest tire you can fit under the fender is, and I’m sure it’s dependent on suspension/wheel setup, but I believe n5tuner claims 15mm wider than stock.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|