Bluetooth antenna cable part number?

[wolfe]

I'm retrofitting bluetooth handsfree audio, and have everything I need except the MULF to Bluetooth antenna cable.

Anyone know if BMW sells this part, or if the only solve is to go aftermarket or make a coax cable with fakra connectors?

I have an aftermarket one but not super happy with the quality. Would prefer to go OEM if available.

thank you.

[zx10guy]

Are you talking about the coax cable to the blue tooth antenna module located next to the left kick panel on the driver's side?

[wolfe]

Yes, that's the one.

Originally Posted by zx10guy

Are you talking about the coax cable to the blue tooth antenna module located next to the left kick panel on the driver's side?

[zx10guy]

Ok. I just happened to have this cable repaired under warranty. The connector end going to the blue tooth antenna kept popping off and wouldn't stay. I'll look around for the work order and pull the part number for you.

[wolfe]

Thank you so much, that would be awesome! I've been looking and haven't turned up anything. I can find the USB cable fine but nothing on the BT antenna.

[zx10guy]

So I have some good news and some bad news.

I found the work order. I looked at the parts listed. Apparently, the part they replaced was just the connector end and wasn't the whole cable assembly. Here is the part number for the connector end: 61136925156 .

Maybe using that part number will help you locate the cable with connector itself.

[wolfe]

Thank you, found the connector ok but it's under repair kits.

I'm starting to wonder if they don't make a pre-terminated cable by itself and only sell the parts to build one yourself.

thanks a ton for digging all this info out for me

[ornicar]

Originally Posted by wolfe

Thank you, found the connector ok but it's under repair kits.

I'm starting to wonder if they don't make a pre-terminated cable by itself and only sell the parts to build one yourself.

thanks a ton for digging all this info out for me

Hi,

did you find the PN of this cable??? i am in the same boat for my combox retrofit


i find that we can maybe use a "wired" Bluetooth Aerial too? what do you think of this idea?