Need Help! BMW 1M rear M badge template

[rex7]

Hi Guys, I need you guys to help with a 1M rear M badge location measurement or template. much appreciated. basically, I can't find any information online.

[ayao]

I just measured mine using the lower right hand corner of the "M" as a reference point.

That corner is 7/16" above the horizontal trunk line.

The right-hand edge of the M badge also sits every-so-slightly inboard (i.e. to the left) of the corner point of the trunk where the two pieces of metal come together. If you were to imagine a vertical line running up towards the ceiling from that corner, the edge of the M badge is approximately 1/32" to the left of that imaginary vertical line.

The lower left-hand corner of the badge (i.e. where it's light blue) is 13/32" above the horizontal trunk line, I'm assuming because the trunk is curved and the bottom edge of the badge is straight.

Happy to try to clarify my cryptic measurements -- it's the best I could do. I'm sure there someone here with something better than a tape measure!

[rex7]

thanks heaps~!