|
|
|
09-12-2020, 07:50 PM | #1 |
Banned
1998
Rep 2,026
Posts
Drives: 2008 E92 328xi
Join Date: Nov 2019
Location: Miami
|
This 3 stage manifold is ready to install. Fully refreshed, cleaned and tested. Waiting to find an N52 as it's new home I take apart the disa valve flaps and clean them, test the internals, grease them and put them back together and test how they work thoroughly to make sure they're in good working shape. Most valves straight out of a used car will be faulty or slow so this is a huge plus to this manifold. Also these disas are both updated revision valves with no risk at all of anything dropping into the intake. Videos of valves working: Large disa Small disa I don't include shipping but depending where you live we can work something out http://rover.ebay.com/rover/1/711-53...8;toolid=11111 |
09-22-2020, 05:34 PM | #3 |
Banned
1998
Rep 2,026
Posts
Drives: 2008 E92 328xi
Join Date: Nov 2019
Location: Miami
|
It's pretty much a swap in and out job. All I'd recommend is to get new intake gaskets as you don't know the condition of the used ones in this manifold or yours. I've got a set of new ones laying around I could throw in for a bit more. Pretty much all the hardware and such can be reused and parts like the pcv heater etc are just swapped over to this manifold from yours
|
Appreciate
0
|
11-26-2020, 06:59 PM | #5 |
Banned
1998
Rep 2,026
Posts
Drives: 2008 E92 328xi
Join Date: Nov 2019
Location: Miami
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|