Forgestar F-14 Gunmetal 19" F/S

Twhill19 · 07-28-2019, 12:57 PM

Have a set of 19" F-14 forgestar wheels for sale. 19"x8.5" FRONT ET 45 and 19"x9" REAR ET 48. The wheels are all relatively new, about 20k miles on all 4. Minor, minor curb damage on the front passenger side wheel. All 4 were straightened about a year ago and haven't been driven on since. Asking $600 OBO for the set. There's MPSS on the two rears 255/30/19 and a PS4S on 1 of the fronts, one wheel has no tire. Front tire size is 225/35/19

Twhill19 · 07-30-2019, 05:35 PM

Pictures coming soon

delsap · 08-05-2019, 09:51 PM

How close are you to 01923?

Twhill19 · 08-05-2019, 09:55 PM

Quote:

Originally Posted by delsap

How close are you to 01923?

I'm in Southie, so, depends on traffic haha

delsap · 08-05-2019, 11:14 PM

That’s the truth, I work in Waltham so I can get into Boston pretty easily after work. Do you have any pictures of the wheels?

Twhill19 · 08-05-2019, 11:29 PM

Quote:

Originally Posted by delsap

That’s the truth, I work in Waltham so I can get into Boston pretty easily after work. Do you have any pictures of the wheels?

Can try to take some tomorrow

delsap · 08-06-2019, 09:08 AM

I’m definitely interested, my only concern is if they will fit with my current suspension setup. I’m lowered on H&R sports with bilstein shocks. I don’t have camber plates so I can only dial in about a degree of negative camber without drilling out the shock mounts.

Twhill19 · 08-06-2019, 05:29 PM

Quote:

Originally Posted by delsap

I’m definitely interested, my only concern is if they will fit with my current suspension setup. I’m lowered on H&R sports with bilstein shocks. I don’t have camber plates so I can only dial in about a degree of negative camber without drilling out the shock mounts.

They will definitely fit. The offsets are set up for "stock", I ran them lowered 1/2 inch no rubbing

Twhill19 · 08-07-2019, 10:11 PM

Quote:

Originally Posted by delsap

I’m definitely interested, my only concern is if they will fit with my current suspension setup. I’m lowered on H&R sports with bilstein shocks. I don’t have camber plates so I can only dial in about a degree of negative camber without drilling out the shock mounts.

Still interested?

m3gasm · 08-17-2019, 09:33 PM

Quote:

Originally Posted by Twhill19

Quote:

Originally Posted by delsap

I'm definitely interested, my only concern is if they will fit with my current suspension setup. I'm lowered on H&R sports with bilstein shocks. I don't have camber plates so I can only dial in about a degree of negative camber without drilling out the shock mounts.

Still interested?

Text me. 949 300 6318 if still available

m3gasm · 08-17-2019, 09:34 PM

Quote:

Originally Posted by Twhill19

Quote:

Originally Posted by delsap

I'm definitely interested, my only concern is if they will fit with my current suspension setup. I'm lowered on H&R sports with bilstein shocks. I don't have camber plates so I can only dial in about a degree of negative camber without drilling out the shock mounts.

Still interested?

Text me. 949 300 6318 if still available

Twhill19 · 09-18-2019, 12:39 AM

pics of (dirty, dust) wheels

Twhill19 · 10-02-2019, 05:12 PM

bump this

Rachel · 10-31-2019, 06:31 PM

Quote:

Originally Posted by Twhill19

bump this

How much tread is left in the tires?

Twhill19 · 10-31-2019, 06:33 PM

Quote:

Originally Posted by Rachel

Quote:

Originally Posted by Twhill19

bump this

How much tread is left in the tires?

Good amount...ran them for 2 summers

07-28-2019, 12:57 PM	#1
Twhill19 hungry 99 Rep 1,193 Posts Drives: 2012-135i-N55 Join Date: May 2012 Location: Boston, MA iTrader: (0)	Forgestar F-14 Gunmetal 19" F/S Have a set of 19" F-14 forgestar wheels for sale. 19"x8.5" FRONT ET 45 and 19"x9" REAR ET 48. The wheels are all relatively new, about 20k miles on all 4. Minor, minor curb damage on the front passenger side wheel. All 4 were straightened about a year ago and haven't been driven on since. Asking $600 OBO for the set. There's MPSS on the two rears 255/30/19 and a PS4S on 1 of the fronts, one wheel has no tire. Front tire size is 225/35/19 __________________ 2012-135i-N55 - Dinan Stage 2. Berk Mids. Berk Street Axle-Back. AR Design Catless-DP. AA Charge-Pipe. ETS FMIC. 19" BBS CH-R 8.5"/9.0". Michelin Pilot 4s (225/35/19 front-255/30/19 rear). AutoCarbon CF Trunk-Spoiler. Stop Tech Performance Rotors/ w Hawk Pads. Dinan Springs. 20% tints
	Appreciate 0 Tweet Quote

07-30-2019, 05:35 PM	#2
Twhill19 hungry 99 Rep 1,193 Posts Drives: 2012-135i-N55 Join Date: May 2012 Location: Boston, MA iTrader: (0)	Pictures coming soon __________________ 2012-135i-N55 - Dinan Stage 2. Berk Mids. Berk Street Axle-Back. AR Design Catless-DP. AA Charge-Pipe. ETS FMIC. 19" BBS CH-R 8.5"/9.0". Michelin Pilot 4s (225/35/19 front-255/30/19 rear). AutoCarbon CF Trunk-Spoiler. Stop Tech Performance Rotors/ w Hawk Pads. Dinan Springs. 20% tints
	Appreciate 0 Quote

08-05-2019, 09:51 PM	#3
delsap New Member 2 Rep 6 Posts Drives: 2001 M5 Join Date: May 2014 Location: 33458 iTrader: (0)	How close are you to 01923?
	Appreciate 0 Quote

08-05-2019, 11:14 PM	#5
delsap New Member 2 Rep 6 Posts Drives: 2001 M5 Join Date: May 2014 Location: 33458 iTrader: (0)	That’s the truth, I work in Waltham so I can get into Boston pretty easily after work. Do you have any pictures of the wheels?
	Appreciate 0 Quote

08-06-2019, 09:08 AM	#7
delsap New Member 2 Rep 6 Posts Drives: 2001 M5 Join Date: May 2014 Location: 33458 iTrader: (0)	I’m definitely interested, my only concern is if they will fit with my current suspension setup. I’m lowered on H&R sports with bilstein shocks. I don’t have camber plates so I can only dial in about a degree of negative camber without drilling out the shock mounts.
	Appreciate 1 Twhill1998.50 Quote

09-18-2019, 12:39 AM	#12
Twhill19 hungry 99 Rep 1,193 Posts Drives: 2012-135i-N55 Join Date: May 2012 Location: Boston, MA iTrader: (0)	pics of (dirty, dust) wheels Attached Images __________________ 2012-135i-N55 - Dinan Stage 2. Berk Mids. Berk Street Axle-Back. AR Design Catless-DP. AA Charge-Pipe. ETS FMIC. 19" BBS CH-R 8.5"/9.0". Michelin Pilot 4s (225/35/19 front-255/30/19 rear). AutoCarbon CF Trunk-Spoiler. Stop Tech Performance Rotors/ w Hawk Pads. Dinan Springs. 20% tints
	Appreciate 0 Quote

10-02-2019, 05:12 PM	#13
Twhill19 hungry 99 Rep 1,193 Posts Drives: 2012-135i-N55 Join Date: May 2012 Location: Boston, MA iTrader: (0)	bump this __________________ 2012-135i-N55 - Dinan Stage 2. Berk Mids. Berk Street Axle-Back. AR Design Catless-DP. AA Charge-Pipe. ETS FMIC. 19" BBS CH-R 8.5"/9.0". Michelin Pilot 4s (225/35/19 front-255/30/19 rear). AutoCarbon CF Trunk-Spoiler. Stop Tech Performance Rotors/ w Hawk Pads. Dinan Springs. 20% tints
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search