02-09-2017, 06:03 PM | #1 |
Second Lieutenant
20
Rep 228
Posts |
Will these wheels fit?
Hi Guys,
I am looking at getting some custom wheels made and wanted some advice. Will these fit without rubbing? I am on stock suspension. Front: 19x9.5 ET25 w 265/30/19 Rear: 19x10.5 ET24 w 285/30/19 Thanks |
02-13-2017, 03:28 AM | #2 |
New Member
19
Rep 14
Posts |
For your reference, I'm running this with no rub.
Front: 19 x 10J ET10 w 245/35/19, Camber 2.1' Rear: 19 x 11J ET18 w 265/35/19, Camber 1.4' IMO, I'll suggest you get front 10J and rear 11J for more tire stretch to fit easier on those size of tires. Offset should be fine I'm running way lower than your willing setup. |
Appreciate
0
|
04-13-2017, 11:40 AM | #4 |
Captain
196
Rep 657
Posts |
Quite a bit of stretch with a 265 on an 11" rim. People tend to want more tyre on the rear on these cars, something like a 10.5" with a 285 for example.
Imske - i've been warned off going over 255 on the front due to rubbing on the inner guard liner. That was a 265 on a 9.5+22 rim so if you went 265 on a 9.5/+25 you'd have 3mm less offset and it'd rub worse. Last edited by T1M; 04-13-2017 at 11:47 AM.. |
Appreciate
0
|
04-13-2017, 06:33 PM | #5 | |
Second Lieutenant
20
Rep 228
Posts |
Quote:
@ Tim - did you run a 255/35 on your 9.5" ET22 and no rub? its pretty common to run 265/30 on this setup but i dont want to go the lower profile |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|