|
|
|
|
|
|
| ||||||||||||||||
Post Reply |
|
|
Thread Tools | Search this Thread |
| 09-23-2019, 02:45 PM | #1 |
|
Lieutenant General
 
2349
Rep 12,905
Posts |
AutoTalent | Dinan intake+suspension+monoball kit+tuner for Bmw E82 1M 2011-2013
 Carbon Fiber Cold Air Intake To order please visit our website by clicking HERE The system is a direct replacement for the factory air box lid, employing a hand-crafted carbon fiber unit that also includes a secondary carbon fiber intake tube that captures cool air from the lower grill and includes the shielding for the conical filter to insulate it from power robbing engine compartment heat. With a peak horsepower of 398 at 5700 rpm and the peak torque of 429 lb-ft at 4300 rpm as tested with Dinan High Capacity Oil Cooler System, intercooler and Dinan Free Flow Exhaust is a monumental increase from stock. As boost is increased through the use of performance software, the single factory intake becomes restrictive and the engine is lacking the air it needs to make maximum power. Our cold air intake force feeds the 3 liter turbocharged inline 6 with greater volumes of cool, oxygen rich air for substantial power gains by utilizing our secondary carbon fiber intake. The system is so effective that the carbon fiber inlet air temperature is a full 40 degrees Fahrenheit cooler than the incoming air from the stock inlet. Due to the increased airflow from our intake, the power-curve is extended into the higher RPM’s for a noticeable change. Stock car gains 5 Hp and 6 ft-lb torque & Dinan Performance Software is highly recommended.  ------------------------------------------------------------ Dinan High Performance Adjustable Coil-over Suspension System To order adjustable coilover suspension please visit our website by clicking HERE To order racing springs coilover suspension please visit our website by clicking HERE For the enthusiast that needs adjustable ride height the Dinan Coil-Over Suspension is for you. Dinan's design keeps the factory Electronic Damper Control shocks in place and creates threaded collars to allow the user to change the ride height. Dinan’s provides Beehive shaped front springs and low profile camber plates with progressive bump stops that allow the car to be lowered up to an 3/4” and still maintain stock suspension travel. Dinan Quiet Design™ Camber plates make it the quietest coil-over suspension on the market. Suspension packers are included to fine tune handling and comfort by changing the clearance of the progressive bump-stops, something no respectable racecar is without. Camber is easy to adjust due to the slotted front mounts and is adjustable between -1.2 to -3.2 degrees. Strut mounts are machined from 6061-T6 aluminum, and are designed with heavy-duty rubber and barrel shaped Delran internal components for superior performance and quiet operation, compared to noisy spherical bearing style mounts. All components are compatible with 2.50" I.D. racing springs for convenient adjustment. Features + Quietest Coil over kit on the market so you can live with it every day. + Beehive shaped front spring and low profile camber plates to maintain full suspension travel with up to one inch of lowering. + Threaded collars allow easy front & rear vehicle height adjustments. + Included suspension packers allow adjustment of bump-stop clearance to fine-tune handling and comfort. + Dinan-spec progressive bump stops improve ride quality at lowered ride heights. + System comes with adjustable camber plates allowing easy camber adjustment between -1.2° and -3.2°. + Camber plates are machined from 6061-T6 aluminum, and are designed with heavy-duty rubber and barrel shaped Delran internal components for superior performance and quiet operation, compared to noisy spherical bearing style mounts. + Improved suspension travel by 12mm front and 7mm rear. + Front & rear Dinan components are compatible with 2.50” I.D. racing springs. + Compatible with BMW non-EDC shocks. + RACING-ONLY PRODUCT   ----------------------------------------------------- Turbo Installation Hardware Kit To order please visit our website by clicking HERE The kit contains OEM parts, including gaskets & hardware that must be replaced during turbocharger installation.  ----------------------------------------------------- Lower Control Arm Monoball Kit To order please visit our website by clicking HERE The quietest bearings on the market are virtually noise free so you can live with them everyday. These are the only bearings on the market that are sealed using a rubber boot to keep out dirt and road grime stopping them form wearing out prematurely. The Dinan Monoball Kit provides responsiveness you can feel by replacing the rubber bushings in the thrust arms with precision ball joints and machined aluminum housings. Improves responsiveness by eliminating the deflection inherent in the stock rubber bushings while also reducing brake shimmy. Features + Improved Steering Responsiveness + Reduces Brake Shimmy + Nylon-lined Bearings for Quiet Operation + Machined Aluminum Housings + Sealed Bearings  ---------------------------------------------------------- High Performance Intercooler To order please visit our website by clicking HERE The system has been engineered as a direct replacement for the stock unit, requiring only minor modifications for a clean, factory-like installation.The intercooler also features larger connector tubing and custom shrouding for maximum efficiency. The intercooler has been designed for use in conjunction with Stage 3 Engine Software, further increasing boost pressure in order to take full advantage of the improved intercooler efficiency. *Dyno results for Stage 3 engine software; High Capacity Oil Cooler; Dinan Intercooler; Free Flow Exhaust.  ------------------------------------------------------ Performance Engine Software/boost Upgrade To order Stage 2 please visit our website by clicking HERE To order Stage 2 Diy please visit our website by clicking HERE To order Stage 3 please visit our website by clicking HERE Dinan Performance Engine Software safely increases turbo-boost pressure, along with properly retuned fuel mixtures, ignition timing and full map rescaling. Dinan software increases water pump speeds as boost pressure increases. It matches the new car warranty coverage for up to 4 years or 50,000 miles, including the possibility of consequential damages. No one offers better performance or backs it up with such comprehensive warranty coverage.   How to Place Your Order: Phone Domestic: (855) 973-2757 X 104 Phone International: (310) 231-7800 X 104 E-mail: online@autotalent.com Website: www.AutoTalent.com Payment:  Installations: Feel free to visit us at our facility in Los Angeles, CA. We install everything we sell. 19143 S. Hamilton Ave Gardena, CA 90248  Shipping: All orders are shipped via FedEx, UPS, USPS and Pilot. International, Hawaii and Alaska customers: Please contact us for the best quote possible. Hours of Operation: Monday through Friday: 10AM-7PM Pacific Time Saturday: By appointment only Last edited by AutoTalent; 09-27-2019 at 12:05 PM.. |
Post Reply |
| Bookmarks |
|
|
