Bolt-in rollcage for BMW E82 coupe with sunroof

[bm49]

This is AGI's bolt-in 6-point roll cage suitable for National level race meetings, rallies and tarmac rally events. It fits into the cabin without cutting the dash; the only items to be removed are the rear seats and the door pulls.
For someone building a car with the possibility of switching from track days to racing in the future, the rear section could be initially installed thereby providing the means to get engineering and RTA approval for road use as a 2-seater. After an initial installation the front part can be installed/removed in about 1.5/1.0 hours.
The driver's side has tabs for a window net but the net is not included and nor is the top bar padding. The cage comes with all bolts/mounts and installation instructions. The paint is scuffed in places from regular usage since January 2016.
Price: $2,000

[highbrowed]

Any pictures with the cage installed by chance?

[bm49]

Attached are 2 photos taken by the cage manufacturer just before final welding and painting were done.
All controls and switches were still operable and the only loss of functionality was the removal of the door pull handles. I initially intended to replace them with a piece of seat belt webbing but more than 2 years later I am still using the door storage bin as a door pull.

[J66]

Originally Posted by bm49

This is AGI's bolt-in 6-point roll cage suitable for National level race meetings, rallies and tarmac rally events. It fits into the cabin without cutting the dash; the only items to be removed are the rear seats and the door pulls.
For someone building a car with the possibility of switching from track days to racing in the future, the rear section could be initially installed thereby providing the means to get engineering and RTA approval for road use as a 2-seater. After an initial installation the front part can be installed/removed in about 1.5/1.0 hours.
The driver's side has tabs for a window net but the net is not included and nor is the top bar padding. The cage comes with all bolts/mounts and installation instructions. The paint is scuffed in places from regular usage since January 2016.
Price: $2,000

interested, is it still avaliable?