Code 2D5A

[Lmfaoo_jose]

Anybody have any experience with this code? What do I need to replace?

Popped up right after flashing stage 0 to get rid of waste gate rattle

[Petro135]

That code also is used for something like vanos and camshaft stuck. I had this awhile back in with some vanos codes. I had changed the vanos and the cam sensors and it went away. But I'm not sure if it's the only code you are getting of it's also your problem. But maybe clean your vanos and see if code comes back up. Of it does not I would go get new vanos. Because cleaning them for me was a very temporary fix. Like a week.

[Lmfaoo_jose]

Originally Posted by Petro135

That code also is used for something like vanos and camshaft stuck. I had this awhile back in with some vanos codes. I had changed the vanos and the cam sensors and it went away. But I'm not sure if it's the only code you are getting of it's also your problem. But maybe clean your vanos and see if code comes back up. Of it does not I would go get new vanos. Because cleaning them for me was a very temporary fix. Like a week.

Originally Posted by Petro135

That code also is used for something like vanos and camshaft stuck. I had this awhile back in with some vanos codes. I had changed the vanos and the cam sensors and it went away. But I'm not sure if it's the only code you are getting of it's also your problem. But maybe clean your vanos and see if code comes back up. Of it does not I would go get new vanos. Because cleaning them for me was a very temporary fix. Like a week.

Do you have any part numbers? I'd love to just replace everything I can

And I don't know if it's related but I didn't take out fuse 70 when flashing MHD stage 0 at first and it failed so I ended up taking it out and it flashed properly

Thanks for the reply man I've been looking all over for an answer

[Petro135]

Originally Posted by Lmfaoo_jose

Do you have any part numbers? I'd love to just replace everything I can

And I don't know if it's related but I didn't take out fuse 70 when flashing MHD stage 0 at first and it failed so I ended up taking it out and it flashed properly

Thanks for the reply man I've been looking all over for an answer

Don't know of it's your answer. It might be. But it's a good place to start.
2 cam sensors under the front of the valve cover. And the 2 vanos right around there too.
13627525014
11367585425