|
|
|
04-28-2019, 04:36 PM | #2 |
Enlisted Member
5
Rep 42
Posts |
+1 on that brotha!
__________________
2nd place is just the 1st LAST!
|
Appreciate
0
|
04-29-2019, 12:38 PM | #3 |
Private First Class
76
Rep 161
Posts |
Going to be hard to find a used one in decent shape but if you're willing to buy new I believe there were still a couple left in Germany last time I checked. (No PDC/No HLW) It's not possible to order the kit anymore but you can still piece it together through your dealer if you know the PN's. I just finished piecing mine together and it looks killer! Let me know if you have any questions.
__________________
2011 135i 6MT
PS2 | Fuel-It PI | MHD Last edited by Divbetic; 04-29-2019 at 02:06 PM.. |
Appreciate
0
|
04-29-2019, 01:49 PM | #5 |
Private First Class
76
Rep 161
Posts |
No website, you'll have to contact your dealer to have them check inventory in Germany. Turner Motorsport was able to check quantity remaining but I actually got a cheaper quote from my dealer. I was able to inspect the part at pickup there and they let me know if I found any damage that BMW would have given me a replacement. However, I did order the remaining trim through Turner because most of it was 15% off at the time.
__________________
2011 135i 6MT
PS2 | Fuel-It PI | MHD |
Appreciate
0
|
04-29-2019, 02:02 PM | #7 |
Private First Class
76
Rep 161
Posts |
I used the Mod Bargains website to piece mine together. It wont let me link to the website but Google "Mod Bargains e82 performance bumper" and it should pop up.
The bumper part number has 4 versions which could affect availability and price. 1. No PDC/No HLW 2. No PDC/With HLW 3. With PDC/No HLW 4. With PDC/With HLW
__________________
2011 135i 6MT
PS2 | Fuel-It PI | MHD |
Appreciate
0
|
04-29-2019, 02:08 PM | #8 |
Private First Class
9
Rep 151
Posts |
mine would be without pdc and without washers
is it expensive to buy from the dealer? i dont know how much this bumper sells for since its an old part, 2013 or so its the last year the e82 was produced |
Appreciate
0
|
04-29-2019, 02:14 PM | #9 | |
Private First Class
84
Rep 199
Posts |
Quote:
Mine has the headlight washers and no PDC
__________________
2011 E82 N55 135i ///M Sport • 6MT • Crimson Red/Black Boston Leather BMW PPK• BMW PE • BMW Aero Kit • Blacklines • Arc 8's • VRSF Charge Pipe • B12 Pro-kit |
|
Appreciate
0
|
04-29-2019, 03:47 PM | #10 |
Private First Class
76
Rep 161
Posts |
Now if only there was a way to do this with the Aero side skirts!
__________________
2011 135i 6MT
PS2 | Fuel-It PI | MHD |
Appreciate
0
|
04-29-2019, 04:25 PM | #11 |
Private First Class
84
Rep 199
Posts |
I did, I was lucky enough that a member pointed me to an open box set on ebay and I purchased instantly. Have not seen another set since.
__________________
2011 E82 N55 135i ///M Sport • 6MT • Crimson Red/Black Boston Leather BMW PPK• BMW PE • BMW Aero Kit • Blacklines • Arc 8's • VRSF Charge Pipe • B12 Pro-kit |
Appreciate
1
Divbetic75.50 |
04-29-2019, 04:32 PM | #12 |
Private First Class
76
Rep 161
Posts |
I did the same thing a few months back but the seller must have realized what he had and never shipped out. Hoping that I'll get another chance to complete the set during my ownership
__________________
2011 135i 6MT
PS2 | Fuel-It PI | MHD |
Appreciate
0
|
04-09-2020, 12:22 AM | #13 | |
Lieutenant
257
Rep 437
Posts |
Quote:
How many parts are needed for this to be done? |
|
Appreciate
0
|
04-09-2020, 03:44 PM | #14 |
Private First Class
76
Rep 161
Posts |
Shouldn't be too many if you reuse your original hardware and aren't planning on adding an oil cooler in the future. If you don't have an m-sport, you'll need the adapter piece to make the holes underneath line up. (I bought this piece brand new on accident when I was doing my swap and still have it if you or anyone else end up needing one.)
__________________
2011 135i 6MT
PS2 | Fuel-It PI | MHD |
Appreciate
0
|
04-09-2020, 06:32 PM | #15 |
User
298
Rep 775
Posts |
|
Appreciate
0
|
04-09-2020, 08:02 PM | #16 | |
Lieutenant
257
Rep 437
Posts |
Quote:
The M Performance bumper is listed on some sites to be up to cars produced to 9/12 my vehicle was produced 7/13.. will the kit still fit? Does anyone know if I could put the 135 cooling ducts in there as well or would that be pointless on a 128 unless I got the 135 wheel/fender liners for the ducting..
__________________
Mods Done: AA Exhaust/Headers | 3SIM | MILVs | StageFP Dyno Tuned | Euro Box Intake Swap | LCI Blackline Tailights | OEM Euro Bi-Xenon Swap from Halogen | Rear Bumper M-Sport Swap | Rear PDC Retrofit | BMW OEM CF Diffuser/Spoiler | BMW Front Aero Kit | Supersprint Sec 1 Cat Delete Straight Pipes
To Do: Ohlins R n T Suspension | Front/Rear Sway Bars | M3 Front Control Arms/Bushings Eventually: AT -> MT Swap (!?) |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|